Charger for all types of 48V 25A batteries made of aluminium with blue Skylla-TG Victron Energy blue finish

Product description:

• This is a charger for batteries of all types, open or sealed.
• It has two independent outputs.
  • One full and one limited to 4 A.
• The charging voltage is adjustable to precisely match any battery system.
  • It can be measured directly from the battery terminals, compensating for voltage loss due to cable resistance.
• Equipped with an external temperature sensor, allowing the charging voltage to be reduced in the event of a rise in battery temperature.
• Its charge is regulated in three stages.
  • They are microprocessor-controlled.
  • The "IUoUo" charging curve ensures fast and safe charging.
  • The duration of the absorption stage can be adjusted by means of a switch.
  • With "Intelligent Startup" function that avoids starting a complete charging cycle on an already charged battery.
• Its output voltage is perfectly stabilised, allowing this charger to be used as a power source without the need for batteries.
• Its nominal voltage is 48 V.
• The supply voltage is 230 Vac.
• The supply voltage range is 185-264 Vac and 180-400 Vdc.
• Frequency 45-65 Hz.
• With a power factor.
• The absorption load voltage is 57 Vdc.
• Float charge voltage is 53 Vdc.
• Domestic battery charging current is 25 A.
• The charging current in domestic battery at 110 Vac is 15 A.
• For batteries with a capacity of 125-250 Ah.
• Connection is with M8 bolts.
• Connection to 230 Vac is with 2.5 mm2 clamps (AWG 6).
• It works in temperatures from -40 to 50 ºC.
• It is made of aluminium with a blue finish.
• Its measurements are 250 mm wide, 365 mm high and 147 mm deep.
• Its degree of protection is IP21.
• It weighs 5.5 kg.
• Safety standard EN 60335-1, EN 60335-2-29.