Roll over image to zoom in
Charger for all types of 24V 30A batteries made of aluminium with blue finish Skylla-TG Victron Energy
Victron Energy - SDTG2400301
New product
Description and specifications
- This is a charger for batteries of all types, open or sealed.
- It has two independent outputs.
- One full and one limited to 4 A.
- The charging voltage is adjustable to precisely match any battery system.
- It can be measured directly from the battery terminals, compensating for voltage loss due to cable resistance.
- Equipped with an external temperature sensor, allowing the charging voltage to be reduced in the event of a rise in battery temperature.
- Its charge is regulated in three stages.
- They are microprocessor-controlled.
- The "IUoUo" charging curve ensures fast and safe charging.
- The duration of the absorption stage can be adjusted by means of a switch.
- With "Intelligent Startup" function that avoids starting a complete charging cycle on an already charged battery.
- Its output voltage is perfectly stabilised, allowing this charger to be used as a power source without the need for batteries.
- Its nominal voltage is 24 V.
- The supply voltage is 120-230 Vac.
- The supply voltage range is 95-264 Vac and 120-400 Vdc.
- Frequency is 45-65 Hz.
- With a power factor.
- The absorption load voltage is 28.5 Vdc.
- The float charge voltage is 26.5 Vdc.
- The charging current for a household battery is 30 A.
- The starting charge current is 4 A.
- For batteries with a capacity of 150-500 Ah.
- Connection is with M8 bolts.
- Connection to 230 Vac is with 2.5 mm2 clamps (AWG 6).
- It works in temperatures from -40 to 50 ºC.
- It is made of aluminium with a blue finish.
- Its measurements are 250 mm wide, 365 mm high and 147 mm deep.
- Weighs 5.5 kg.
- Safety standard EN 60335-1, EN 60335-2-29.