Centaur Victron Energy 12V 30A universal battery charger made of aluminium with blue finish

Product description:

• This is a universal battery charger.
• Its self-calibrating input covers 90-265 Vac with 50/60Hz frequency.
• Can be used anywhere in the world.
• Maintains full power output within the specified range.
• Fully automatic three-stage full load.
• Three output loads are available, allowing multiple batteries to be configured.
• Resistant to heat, humidity and saline conditions.
• The electronic circuits are protected with an acrylic varnish to prevent oxidation.
• It has temperature sensors, guaranteeing that the components work correctly.
  • If necessary, it will automatically lower the power output during extreme environmental conditions.
• This charger accepts a very wide voltage range without the need for adjustments.
• It is compatible with all voltages, frequencies, currents and operates on unstable power grids.
• Its three isolated outputs allow simultaneous charging of up to three sets of batteries.
  • Each output can supply the rated charging power.
• It charges at full power until the output current reaches 70% of the rated power. Once it reaches this point, it maintains a constant absorption voltage for four hours.
  • After this time, it switches to float mode.
  • It has an internal temperature sensor that compensates the charging voltage of -2 mV per °C (per element).
• Equipped with an internal switch for easy selection of voltages adapted to the main types of batteries (lead-acid, gel, AGM).
• On the front panel, it has an ammeter that allows you to know the charger's performance at all times.
• Its nominal voltage is 12 V.
• Its voltage is 120 - 240 V.
• Voltage is 90 - 265 Vac and 90 - 400 Vdc.
• Frequency is 45-65 Hz.
• Absorption charging voltage is 14.3 / 28.5 Vdc.
• Float charge voltage is 13.5 / 27 Vdc.
• Its charging current is 30 A.
• Recommended battery capacity is 120 - 300 Ah.
• Fan controlled temperature and current.
• With output and temperature short circuits.
• Operates at a temperature of -20 to 60 ºC.
• Battery connection is with M6 bolt.
• It is made of aluminium with blue finish.
  • With epoxy coating and stainless steel fixings.
• Its measurements are 215 mm wide, 355 mm high and 110 mm deep.
• It has IP20 protection rating.
• Weighs 3.8 kg.
• Safety standard EN 60335-1, EN 60335-2-29, UL 1236.
• Quick and easy to assemble.