Ardesia Plus GME extra flat custom made shower tray with graphite colour gel coat finish

• Extra-flat and lightweight shower tray, with an elegant and modern design. Ardesia Plus model.
• Available with slate texture.
• Colour: Graphite (RAL 7016).
• The width of this shower tray can be manufactured from 70 to 100 cm. You must enter the desired measurement.
• The length of this shower tray can be manufactured from 90 to 200 cm. Please enter the desired size. For sizes between 200 and 220 cm, please contact us at materialesdefabrica.com and we will give you an estimate.
• The sizes that are in stock are the sizes finished in 0. For the rest of the sizes, the plate immediately above is taken and the cut to size is made in the factory. This increases the delivery time (see notes below).
• This plate is extra flat and has a thickness of 3 cm.
• Manufactured in resin and a new mineral filler formula with sanitary Gel Coat (see notes below).
• This new mineral filler formula allows to produce a tray with a considerable weight reduction.
• The weight of this shower tray is from 23 to 60 kg, depending on the size.
• Anti-slip C3, which is the highest rating that can be awarded to a shower tray.
• Includes 2 mm thick stainless steel drainage grating.
• High quality extra-flat standard valve with horizontal outlet included.
• The drain position is lateral. The position of the drain varies according to the size of the shower tray to guarantee correct water drainage.
• The cut to size is made with Gel Coat finish.
• If you would like any special cut, which is not curved, to be made to the shower tray so that it adapts perfectly with your needs, please contact us at [email protected]

Material characteristics:

Gel Coat is a coating that makes the shower tray stronger and more resistant to UV rays, hydrolysis, chemicals, impact and scratches. Gel-Coat retains heat and is warm to the touch and can perfectly mimic natural materials such as slate, stone or sand.

• Concerned about the quality offered to its customers, GME DIVISION BATHROOMS SL has certificates that guarantee the quality of all its products, which comply with all European regulations.
• At the same time, GME DIVISION BAÑOS SL is associated with AIDIMA (Technological Institute), in which inspections and laboratory tests are carried out to guarantee the quality and proper functioning of the products they offer.
• The quality levels of GME products allow them to extend the guarantee established by law to 3 years. This warranty does not cover plastic parts or bearings and will be void if the products are misused or mishandled.