Roll over image to zoom in
Made-to-measure extra flat shower tray with gel coat white finish Ardesia Plus GME
GME® - ARDESIAPLUS-blanco+7777
New product
Product details
- Extra-flat and lightweight shower tray, with an elegant and modern design. Ardesia Plus model.
- It has a slate textured finish.
- Colour: White (RAL 9003).
- The width of this shower tray can be manufactured from 70 to 100 cm. The desired size must be entered.
- The length of this shower tray can be manufactured from 90 to 200 cm. Please enter the desired size.
- The sizes that are in stock are the sizes ending in 0. For the rest of the sizes, the next larger size is taken and the shower tray is cut to size in the factory. This increases the delivery time (see notes below).
- This plate is extra flat and has a thickness of 3 cm.
- Manufactured in resin and a new mineral filler formula with sanitary Gel Coat (see notes below).
- This new mineral filler formula allows to produce a tray with a considerable weight reduction.
- The weight of this shower tray is from 23 to 60 kg, depending on the size.
- Anti-slip C3, which is the highest rating that can be awarded to a shower tray.
- Includes 2 mm thick stainless steel drainage grating.
- High-quality extra-flat standard valve with horizontal outlet included.
- The drain position is lateral. The position of the drain varies according to the size of the shower tray to guarantee correct water drainage.
- The cut to size is made with Gel Coat finish.
Characteristics of the material:
Gel Coat is a coating that makes the shower tray more solid and resistant to UV rays, hydrolysis, chemical products, impacts and scratches. Gel-Coat retains heat and is warm to the touch and can perfectly mimic natural materials such as slate, stone or sand.
Additional notes about GME:- Concerned about the quality offered to its customers, GME DIVISION BATHROOMS SL has certificates that guarantee the quality of all its products, which comply with all European regulations.
- At the same time, GME DIVISION BAÑOS SL is associated with AIDIMA (Technological Institute), in which inspections and laboratory tests are carried out to guarantee the quality and proper functioning of the products offered.
- The quality levels of GME products allow them to extend the guarantee established by law to 3 years. This warranty does not cover plastic parts or bearings and will be void if the products are misused or mishandled.