Roll over image to zoom in
Controller and data monitor for MPPT charge controllers with VEDirect Victron Energy VEDirect port
Victron Energy - SCC900500000
New product
Description and specifications
- This is a control display for BlueSolar and SmartSolar MPPT solar chargers.
- It has a fused power cable for older solar charger models.
- This power cable carries power from the battery to the display, allowing it to operate.
- It connects via a VE.Direct cable which is not included.
- It allows the display of live and historical data, and also works to configure it.
- In addition, it can be used to configure the settings of the solar charger.
- The display shows the following data.
- Number readout with corresponding unit of readout, such as V, A, W, kWh, h or "!
- Type of reading, such as charge, battery, PV or state of charge.
- Connection status indicator.
- Buttons to navigate through the solar charger readings and adjust the solar controller parameters.
- Connect or back button.
- Select or confirm button.
- Up" and "down" button to navigate through the items or increase/decrease the value.
- The supply voltage range (from the battery) is 6.5-95 Vdc.
- The supply voltage range (via the VE.Direct cable) is 5 V dc.
- The working temperature range is -20 to 50 ºC.
- The fuse rating of the supply cable is 100 mA.
- Its length is 1.5 m.
- It measures 52 mm in diameter and 31 mm deep.
- It weighs 50 gr.
- It is compatible with Victron Energy's BlueSolar MPPT and SmartSolar MPPT solar charger ranges.
- Except BlueSolar MPPT 70/15.