Roll over image to zoom in
LCD Display for Victron SmartSolar Control Victron Energy Solar Controllers
Victron Energy - SCC900650010
New product
Description and specifications
- This is an LCD control display for the BlueSolar and SmartSolar solar charge controllers.
- It plugs into the front of the controller and the display is connected.
- It can be used to control the solar charger.
- It allows the display of live and historical data.
- In addition, it can be used to configure the settings of the solar charger.
- The display shows the following data.
- Number reading with corresponding reading unit, such as V, A, W, kWh, h or °C/°F.
- Type of reading, such as battery, PV or temperature.
- State of charge and charging phase.
- Warning indicator and connection indicator.
- Buttons allow you to navigate through the solar charger readings and adjust the solar controller parameters.
- Connect or back button.
- Select or confirm button.
- +" and "-" button to navigate through the items or increase/decrease the value.
- This display is suitable for Victron Energy BlueSolar and SmartSolar MPPT 150V or 250V solar chargers.
- The port connector of the display is RS232 9.
- It measures 116 mm wide, 25 mm high and 50 mm deep.
- Weighs 66 grams.