Roll over image to zoom in
Kassandra Clio patterned semicircular shower enclosure with sliding doors
Kassandra - CU130 16 Clio
New product
Description and specifications
- Curved corner shower enclosure for corner shower trays, from the 400 series.
- Consists of 4 panels: 2 sliding doors, and 2 fixed panels.
- The glass is decorated to get more privacy in the shower (Clio motif, produced by sandblasting).
- Height: 195cm.
- Anodized profiles with a glossy silver finish.
- Features a tempered glass which measures 6mm in thickness.
- Double adjustable bearings on the top.
- Without bottom profile.
- Its glass has an EasyClean treatment which allows the user to enjoy and keep their screens always clean, with minimal effort and water consumption. EasyClean repels limescale, oils, and grease, preventing them from sticking to the glass. To clean the treated glasses, use clean water, and dry them with a soft cloth. The guarantee of this treatment is maximum (4000 cleaning cycles, tested and approved by European laboratories).
- The doors are detachable for easy cleaning.
Shower enclosure options:
You can pick between different measurements that will adapt perfectly to your needs thanks to the compensation profiles.
Width: from 76 to 79cm. Depth: from 76 to 79cm. For 80x80cm shower trays with a 500mm radius (Roca radius). Door opening: 44cm.
Width: from 86 to 89cm. Depth: from 86 to 89cm. For 90x90cm shower trays with a 500mm radius (Roca radius). Door opening: 51.5cm.
Width: from 76 to 79cm. Depth: from 76 to 79cm. For 80x80cm shower trays with a 550mm radius (Ideal Standard radius). Door opening: 43.5cm.
Width: from 86 to 89cm. Depth: from 86 to 89cm. For 90x90cm shower trays with a 550mm radius (Ideal Standard radius). Door opening: 51cm.
Radius:
- Ideal Standard radius: 55cm.
- Roca radius: 50cm.
How to calculate the radius or your enclosure:To find the radius of a semicircular enclosure, first make a marking on the perimeter of the shower tray the points where the straight side meets the curve on both sides (shown in black on the last image). Then, draw a line from the crossing point of these lines to the perimeter (shown in red).
That line has the length of the radius: 50cm if it is a Roca radius, and 55cm if it is Italian or Standard radius.