Roll over image to zoom in
Wall-mounted extractor hood with curved glass flange in stainless steel colour Teka
Teka - 40455381
New product
Description and specifications
- Sophisticated decorative wall-mounted extractor hood, in steel colour and with curved glass wing.
- It has an excellent absorption capacity, preventing fumes and bad smells in your kitchen.
- It has an Ecopower shielded motor, with double turbine, thanks to which less noise is obtained during operation, maintaining maximum extraction efficiency.
- This extractor hood has 3 speeds plus 1 intensive speed.
- It has backlit electronic controls, which allow you to select the different extraction speeds, depending on your needs.
- It has a suction time programmer for greater convenience in use.
- It has 12-layer filters that absorb up to 98% of grease, resulting in a hood that is always clean.
- It has a filter saturation indicator light, which warns when the grease filter needs to be cleaned.
- It has the possibility of recirculation operation, which means that it does not need an outlet to the outside of the house (optional recirculation kit must be purchased).
- It has a non-return valve, which generates a correct circulation of the ventilation.
- It includes 2 LED lamps, generating optimum lighting and reducing energy consumption.
- This hood is environmentally friendly, as it generates lower consumption and maximum efficiency.
Technical data:
- Extraction capacity: 315 to 807 cubic metres per hour.
- Sound power: 56 to 68 decibels.
- Number of filters: 1 stainless steel filter.
- Hood dimensions: 500 mm deep x 674-1004 mm high. Choice of width.
- Internal height: 955 mm.
- Hood weight: 14 to 15.2 kg.
- Colour: Stainless steel with glass flange.
- Model: NC 785 or NC 985. Depending on the chosen width.
- Energy efficiency class: G (previously classified as A).
Optional:
- Hood width.
- Option 1: Model NC 785, 700 mm wide.
- Option 2: Model NC 985, 900 mm wide.
Both options have dimensions of 500 mm depth x 674-1004 mm height. And 955 mm interior height.
- Conventional recirculation kit or with regenerative filters.
- Possibility of recirculation operation, which does not require a smoke outlet to the outside of the house.
- With regenerative or conventional filters, which eliminate up to 95% of odours for approximately 3 years.
- Option 1: Conventional recirculation kit with pipe covers. Model CFH 15200 L3C (includes conventional filter C1RTK).
- Option 2: Regenerative recirculation kit with tube covers. Model RFH 15200 L3C (Includes a corrugated tube and a ceramic filter R1RTK).
- Carbon filters:
- 1 Conventional filter C1RTK.
- 1 R1RTK regenerative filter.
- Long upper tube cover.
- Hood extension 800 mm.
- Stainless steel colour.
Payment methods
