Parallel bed lathe with digital position indicator and spindle speed measurement sensor Optimum Optimum

Product description:

• Optimum brand bench top parallel lathe.
• Measures 202.5 cm wide, 161.5 cm high and 91.5 cm deep.
• With digital position indicator and sensor to measure the spindle speed.
• It has a central lubrication system in the longitudinal displacement.
• The spindle is hardened and ground with two adjustable precision tapered bearings. Fully oil immersed.
• With induction hardened precision ground guideways.
• The emergency stop system is activated by foot pedal.
• Cast iron bedplate made in one piece.
• Guaranteed concentricity on the spindle axis with a minimum accuracy of 0.015 mm.
• Metric threads are adjustable via the lever on the control panel.
• Safety handwheels with release function on X and Z axes.
• Z-axis slide is hardened and ground.
• It is possible to change the direction of the longitudinal slide to right or left.
• With cooling system and tank with level indicator and oil separator.
• The screw caps are made of lead.
• Contains knobs with automatic shut-off.

Technical data:

• Point height: 210 mm.
• Max. height of the square turret housing: 20 mm.
• Bed width: 250 mm.
• Longitudinal feeds: 0.05 - 1.7 mm/rev.
• Transverse feeds: 0.025 - 0.85 mm/rev.
• Tailstock Morse taper: MT 4.
• Morse taper of main spindle: MT 6.
• Max. distance between points: 1.000 mm.
• Spindle speed range: 45 - 1.800 rpm.
• Length of bed cutout: 260 mm.
• Number of speeds: 16.
• Net weight: 1,160 kg.
• Motor power: 6 HP / 4.6 kW / 400V.
• Tailstock shank travel: 120 mm.
• Travel of the tool carriage (charriot): 140 mm.
• Cross slide travel: 230 mm.
• Main spindle support (nose): Camlock DIN ISO 702-2 No. 6.
• Ø of the spindle of the spindle-head: 52 mm.
• Max. turning Ø without bridge: 590 mm.
• Max. Ø on bed: 420 mm.
• Max. Ø on slide: 250 mm.