Adler EVO 40 BT BT single-phase industrial dishwasher with 40x40 basket and digital interface made of stainless steel

Product description:

• This single-phase dishwasher from Adler is ideal for professional use in catering and gastronomy.
• Its break tank system allows constant rinsing, temperature and pressure.
• Its digital interface allows you to control all the main wash functions.
• It is made of AISI 304 stainless steel.
  • The wash arms are made of food grade PVC and fibreglass.
• It has 5 fixed washing cycles.
  • 60'': washes 60 baskets per hour.
  • 120'': washes 30 baskets per hour.
  • 180'': washes 20 baskets per hour.
  • 240'': washes 15 baskets per hour.
  • 600'': washes 6 baskets per hour.
• Its controls are protected against humidity and its closing is double ball with micro.
• Its structure is robust, the doors are double insulated with reinforced hinges.
• Its tank has rounded edges
  • This reduces the accumulation of dirt, preventing the proliferation of bacteria.
• It has a useful height of 27 cm.
• The front control has 4 parts.
  • On/off button.
  • Cycle selector.
  • Digital interface with temperature recording.
  • Wash cycle start.

Technical data:

• The dishwasher has the following characteristics.
  • Its measurements are 48 cm wide, 68.7 cm high and 51.7 cm deep.
  • Its productivity is selectable in 5 cycles.
    • From 6 baskets per hour (600'' cycle).
    • Up to 60 baskets per hour (60'' cycle).
  • The tank has a capacity of 11 litres.
    • Operates at 55 °C.
    • Its resistance is 2 kW.
  • The boiler has a capacity of 3 litres.
    • It operates at 85 °C.
    • Its resistance is 2.4 kW.
  • Its water consumption is 1.5 litres per cycle.
    • The water inlet pressure is 0.5 to 1 bar.
  • The power of the washing pump is 0.20 kW - FIR 0.3 HP.
    • The maximum consumption of this dishwasher is 2.5 kW.
    • It works with 230 V/1N voltage.

• The optional water softeners have the following characteristics.
  • Important: The installation of water softeners is recommended in cases where the supplied water exceeds a hardness of 15 °dH.
    • They allow an optimal functioning of the machinery.
    • They prevent limescale build-up and the problems associated with it.
  • They have a 3/8" connection.
  • All water softeners have a diameter of Ø 18.5 cm.
    • The 8-litre water softener is 40 cm high and can hold up to 5.8 litres of resin.
    • The 12-litre water softener is 50 cm high and can hold up to 9 litres of resin.
• The optional booster pump kit has the following features.
  • It has an 8 μF condenser.
  • Both its inlet and outlet are Ø 12 mm in diameter.
  • It operates with a power of 0.32 Kw.
    • Its supported voltage is 230 V.
    • The working frequency is 50 Hz.
• The optional detergent dispenser kit has the following characteristics.
  • It operates with a power of 230 V.
    • Its working frequency is 50 to 60 Hz.
  • It has a regulator from 0 to 3 l/h.
  • A mounting kit is included.

Optional:

• You can choose this product with the following optional extras.
  • Discharge pump.
  • Manual water softener.
    • 8 litres.
    • 12 litres.
  • Pressure booster pump kit.
  • Detergent dispenser kit.
  • Additional basket.
    • 40 cm wide and 40 cm deep basket.
    • Dish basket 40 cm wide and 40 cm deep.

Options to choose from::