Pumping station with 3 inlet multi-diameter grinder turbine in grey colour Sanicubic 1 VX SFA

• Station for direct installation on the ground without excavation.
• Consisting of a motor that is both a grinder and a pump.
• Includes free-flowing Vortex turbines.
• This product measures 70.15cm wide, 50.4cm high and 55cm deep.
• It has an automatic start with a microswitch system. Water enters and displaces the air inside to the detector which starts the motor.
• Adds a wired alarm that checks the operation of the motor.
• It has 3 multi-diameter inlets (40mm, 50mm, 100mm or 110mm):
  • 2 inlets on the sides.
  • 1 at the top.
• It has a drainage elbow with a non-return valve that serves to lift the water.
• The equipment must be ventilated.
• The waste can be lifted up to a height of 13 metres.
• Withstands water temperatures up to 70°C.
• Can be used in households or in commercial units for toilets, urinals, bathtubs, showers, bidets, sinks, dishwashers, washing machines, etc.

Technical data:

• Electrical:
  • Connection type: single-phase.
  • Voltage (V):230.
  • Power consumption P1 (W): 2000.
  • Motor power P2 (W): 1400.
  • Operating mode: S3 15%.
  • Protection rating: IP68.
• Hydraulics
  • Max. HMT (m):13.
  • Max. flow rate (m³/h): 40.
  • Diameter of external inlets (mm): 40, 50, 100, 110, 125.
  • External exhaust diameter (mm): 90/110.
  • External diameter of external ventilation (mm): 75.
  • Total volume (L): 60.
  • Useful volume (L): 21.
  • Level ON/Level OFF (mm): 165/95.
  • Alarm level (mm): 235.
  • Solid weights (mm): 50
  • Turbine type: vortex.
  • Detection type: pneumatic.