Pumping station for direct floor installation with 5 inlets Sanicubic 2 Classic SFA

• Station for direct installation on the ground without excavation.
• Composed of two motors that work independently and alternately.
  • They include stainless steel blades for shredding waste.
  • They work alternately at each start or as a duo if a sudden high flow of material is introduced.
  • In the event of damage to one of the motors, the other will continue to work so that there is no interruption in operation.
• This product is 68.7cm wide, 49cm high and 51.6cm deep.
• It has an automatic start with a micro-switch system. The water enters and displaces the air inside to the detector which starts the motor.
• It has 5 multi-diameter inlets (40mm, 50mm, 100mm or 110mm):
  • 2 inlets on the sides.
  • 3 at the top.
• It has a drainage elbow with a non-return valve that serves to lift the water.
• The equipment must be ventilated.
• The waste can be lifted up to a height of 14 metres or a distance of 110 metres.
• Withstands water temperatures up to 70°C.
• Can be used in households or in commercial units for toilets, urinals, bathtubs, showers, bidets, sinks, dishwashers, washing machines, etc.

Technical data:

• Electrical:
  • Connection type: single-phase.
  • Voltage (V):230.
  • Frequency (Hz): 50-60.
  • Power consumption P1 (W): 1500.
  • Motor power P2 (W): 1050.
  • Operating mode: S3 50%.
  • Protection rating: IP68.
• Hydraulics
  • Max. HMT (m):13.
  • Max. flow rate (m³/h): 15.
  • Diameter of external inlets (mm): 40, 50, 100, 110.
  • External diameter of evacuation (mm): 50.
  • External diameter of external ventilation (mm): 50.
  • Total volume (L): 45.
  • Useful volume (L): 17.5.
  • Level ON/Level OFF (mm): 140/70.
  • Alarm level (mm): 210.
  • Solids passage (mm): 8.
  • Turbine type: Pro X K2 blades.
  • Detection type: pneumatic.