Vertical surface adjustable pressure equipment for clean water pumping CKE 4T Multi 35 10 ESPA

Product description:

• Vertical surface adjustable pressure equipment, for clean water pumping.
• Water pump designed to regulate and maintain an adequate pressure and constant flow in the place where it is installed. For domestic, industrial, agricultural and gardening use.
• Suitable for use in ponds and tanks for irrigation, transfer and pressurisation.
• The pump body, shaft, impellers and manifolds are made of stainless steel.
• The suction and discharge are made of cast iron.
• The diffusers are made of a reinforced technopolymer which makes it resistant and light for continuous use.
• The motor casing is made of aluminium.
• Valves and connections are made of brass.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water in pressure jets.
• It is electrically powered, three-phase, asynchronous, two-pole type.
• It has protection functions against dry running, overcurrent, overtemperature, short circuit and supply voltage with automatic reset.
• Pressure transducer failure detection functionality.
• Includes earth fault and motor phase error and communication.
• This unit is equipped with two Multi model pumps of the brand Espa, two Speedrive V2 frequency variators, impulsion manifold, a control and manoeuvre panel and, optionally, a suction manifold.
• It also has valves, connections, check valves, base and a pressure transducer.
• The maximum flow rate is 42000 l/h.
• The maximum pumping head is 138m.
• It has a power of 4 kW.
• Pump type: Vertical surface water pump Multi CKE4 35 10 ESPA.
• Frequency inverter model: Speedrive V2 T55.
• Suction connection: 1 1/2" — 3.81cm.
• Discharge connection: 1 1/4" — 3.175cm.
• Delivery manifold connection: 4" — 10.16cm.
• Weighs 198 kg.

Optional: a suction kit with the following dimensions can be added to the unit.

• Manifold diameter: 3" — 7.62cm.
• Valve diameter: 1 1/2" — 3.81cm.
• Flange diameter: 1 1/2" — 3.81cm.

It is possible to add the suction kit.