CKE 2 Multi 35 6 ESPA vertical three-phase surface-mounted water pump with three-phase connection

Product description:

• Vertical surface adjustable pressure equipment, for clean water pumping.
• Water pump designed to regulate and maintain an adequate pressure and constant flow in the place where it is installed. For domestic, industrial, agricultural and gardening use.
• Suitable for use in ponds and tanks for irrigation, transfer and pressurisation.
• The pump body, shaft, impellers and manifolds are made of stainless steel.
• The suction and discharge are made of cast iron.
• The diffusers are made of a reinforced technopolymer which makes it resistant and light for continuous use.
• Motor casing made of aluminium.
• Valves and connections are made of brass.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water in pressure jets.
• It is electrically powered, three-phase, asynchronous, two-pole type.
• It has protection functions against dry running, overcurrent, overtemperature, short circuit and supply voltage with automatic reset.
• Pressure transducer failure detection functionality.
• Includes earth fault and motor phase error and communication.
• This unit is equipped with two pumps model Multi of the brand Espa, two Speedrive V2 frequency variators, impulsion manifold, a control and manoeuvre panel and, optionally, a suction manifold.
• It also has valves. connections, check valves. base and a pressure transducer.
• The maximum flow rate is 21000 l/h.
• The maximum pumping head is 83m.
• It has an output of 2.2 kW.
• Pump type: ESPA Multi 35 6 T vertical surface water pump.
• Frequency inverter model: Speedrive V2 T22 frequency inverter.
• Suction connection: 3.81cm.
• Discharge connection: 3.175cm.
• Supply manifold connection: 5.08cm.
• Weight 73 kg.

Optional: a suction kit with the following dimensions can be added to the equipment.

• Collector diameter: 5.08cm.
• Valve diameter: 3.81cm.
• Flange diameter: 3.81cm.

Options to choose from::