Vertical surface adjutable water pump with aluminium casing CKE 1M Multi 35 5 ESPA

Product description:

• Vertical surface adjustable pressure equipment, for clean water pumping.
• Water pump designed to regulate and maintain an adequate pressure and constant flow in the place where it is installed. For domestic, industrial, agricultural and gardening use.
• Suitable for use in ponds and tanks for irrigation, transfer and pressurisation.
• The pump body, shaft and manifolds are made of stainless steel.
• The suction and discharge are made of cast iron.
• The diffusers are made of a reinforced technopolymer which makes it resistant and light for continuous use.
• The motor casing is made of aluminium.
• Valves and connections are made of brass.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water in pressure jets.
• It operates on electric power, single-phase, asynchronous, two-pole type.
• It has protection functions against dry running, overcurrent, overtemperature, short circuit and supply voltage with automatic reset.
• Pressure transducer failure detection functionality.
• Includes earth fault and motor phase error and communication.
• This unit is equipped with a Multi pump model of the brand Espa, a Speedrive V2 frequency variator, impulsion manifold, a control and manoeuvre panel.
• It also has valves, connections, check valves, base and a pressure transducer.
• The maximum flow rate is 10500 l/h.
• The maximum pumping head is 67m.
• It has a power of 1.5 kW.
• Pump type: ESPA Multi 35 5N M vertical surface water pump.
• Frequency inverter model: Speedrive V2 M22 frequency inverter.
• Suction connection: 3.81cm.
• Discharge connection: 3.175cm.
• Connection of the discharge manifold: 5.08cm.
• Weight 38 kg.