Water pump with built-in pressure control and horizontal surface for clean water PDS 3-100 MA ESPA

Product description:

• Water pump with built-in pressure control for clean water supply.

Description of the Prisma water pump

• Self-priming pump up to 2 m, designed for domestic, industrial, agricultural and gardening use.
• Suitable for use in ponds and tanks for irrigation, transfer and pressurisation.
• This multi-stage pump is very quiet and is recommended for use in clear water.
• The pump body, impellers and shaft are made of stainless steel.
• The suction and discharge are made of cast iron.
• The diffusers are made of a reinforced technopolymer which makes it resistant and light for continuous use.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water in pressure jets.
• It is electrically powered, single-phase, asynchronous, two-pole type. It is fan-cooled. Includes 2 m cable with F-type plug for safety.

Description of the Pressdrive presscontrol

• Pressure regulating device. Attaches to the water pump.
• Ideal pressuriser to start and stop the pump depending on the pressure of the water demand.
• This device is made of a reinforced technopolymer which makes it resistant and light for continuous use.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The equipment is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water in pressure jets.
• The unit is supplied complete with connectors and check valve.
• It is delivered with an F-type plug for safety.
• It has automatic reset and dry run protection functions.

Hydraulic characteristics:

• Maximum flow rate is 3600 l/h at a head of 17m.
• The maximum pumping head is 47m.
• The pump operates on a voltage of 230 V with an electric current of 4.1 A.
• It has a power of 0.75 kW, 1 HP.
• The maximum pressure that the pressuriser can withstand is 10 bar.
• The start-up pressure can be regulated and varies between 1.5 and 2.5 bar.
• The pressure control operates on a voltage of 230 V with an electrical current of up to 12 A.
• The unit operates at a speed of 50/60 Hz.
• The stop pressure of the pressure control is the maximum pressure that the pump can withstand.
• Suction/pressure connection: 2.54cm.
• Weighs 12.7 kg.