Submersible and centrifugal water pump made of stainless steel ACUARIA 27S 6 M ESPA

Product description:

• Cylindrical, multistage, centrifugal pump for pumping clean water.
• Well pump designed for domestic, industrial, agricultural and gardening use.
• Suitable for working in open wells, ponds and tanks for irrigation, transfer and pressurisation.
• It is recommended for use in clear water as the maximum solids passage is 2mm.
• It can be submerged to a depth of up to 12 metres.
• The pump body, drive, suction and shaft are made of stainless steel.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IP68 protection system. If a product has a protection certificate, it means that it is equipped with insulation against dust, and that it can remain in contact with liquid for an indefinite period of time.
• It operates on electric power, single-phase, asynchronous two-pole type. It is supplied with 15m of cable. It is directly water-cooled and has thermal protection for greater safety.
• The maximum flow rate is 7200 l/h at a head of 24 m.
• The maximum pumping head is 68m.
• It operates with a voltage of 1-230 watts and an electrical current of 10.8 A.
• It has a power of 1.5 kW, 2 HP.
• Its dimensions are 13.8cm diameter x 65.5cm high. Delivery connection: 2.54cm. Weighs 24 kg.
• Does not include check valve.
• No level switch.
• This submersible pump includes a capacitor for quicker start-up and shut-down of the motor with a 15m cable, without plug.
• Without buoy (M).
• The power supply is type M.