[for] irrigation
[for] fountains and ponds
[for] deep wells (more than 10 metres)
[for] domestic use
[for] wells
Type of water [Water pumps]
[for] clean water
Special pumps [Water pumps]
centrifugal
pressurizing
Power [Water pumps]
501 to 1000W$ (watts)$
Volts [Water pumps]
230V$ (volts)$
Flow rate [Water pumps]
[flow rate] up to 7000L/h
Connection [Water pumps]
[with] single-phase [connection]
Specific references
EAN13
8421535173144
New
Product details - Cylindrical and submersible water pump up to 12 metres depth ACUARIA 07S 6 M ESPA
Cylindrical, multistage centrifugal pump for pumping clean water.
Well pump designed for domestic, industrial and agricultural use, as well as for gardening.
Suitable for use in open wells, ponds and tanks for irrigation, water transfer and pressure boosting.
The maximum flow rate is 3900 l/h at a head of 9 m.
The maximum pumping head is 60 m.
Recommended for use with clean water, as the maximum solids passage is 2 mm.
It can be submerged to a depth of up to 12 metres.
The pump body, discharge, suction and shaft are made of stainless steel.
The maximum liquid temperature supported by the pump is 40 °C, thanks to the motor's Class F insulation.
The pump motor is equipped with an IP68 protection system. If a product has a protection certificate, this means that it is protected against dust ingress and can remain in contact with liquid indefinitely.
It is electrically powered and features a single-phase, two-pole asynchronous motor. It is supplied with a 15 m cable. It is cooled directly by water and features thermal protection for greater safety.
It operates at a voltage of 1 to 230 watts and an electrical current of 6.2 A.
It has a power output of 0.9 kW, 1.2 HP.
Its dimensions are 12.5 cm in diameter x 56.9 cm high. Discharge connection: 2.54 cm. It weighs 12.4 kg.
Non-return valve not included.
It does not have a level switch.
Includes a 15 m cable.
This submersible pump includes a capacitor for faster motor start-up and shutdown.
The capacitor type must be selected. By default, the internal capacitor (without plug) is selected.
Without float switch (M).
The power supply is Type M.
Capacitor Type:
Internal capacitor with cable and no plug: the capacitor is located inside the pump and has a cable without a plug.
External capacitor without housing and without Type F plug: the capacitor is located outside the pump, does not have a protective housing, and the pump cable does not have a plug.
Product classification::
This product belongs in the category Water Pumps (Hydraulic Pumps, Centrifugal Pumps, Electric Pumps): submersible pumps, electric, for irrigation, for fountains and ponds, for deep wells (more than 10 metres), for domestic use, for wells, for clean water, centrifugal, pressurizing, 501 to 1000W (watts), 230V (volts), flow rate up to 7000L/h, with single-phase connection.
SKU: 8421535173144, 209132, 209125
Options to choose from::
Condenser Type :
External condenser without box and type F plug, Internal capacitor with cable and no plug.
https://habitium.com/ie/water-pumps/410183-4944064-cylindrical-and-submersible-water-pump-up-to-12-metres-depth-acuaria-07s-6-m-espa.html#/28364-condenser_type-internal_capacitor_with_cable_and_no_plugGB-410183Cylindrical and submersible water pump up to 12 metres depth ACUARIA 07S 6 M ESPAhttps://cdn.habitium.com/313260/cylindrical-and-submersible-water-pump-up-to-12-metres-depth-acuaria-07s-6-m-espa.jpg?sto=true&width=480581.38instockEspa955.71472.6739304.33/Water Pumps