Cylindrical and water pump submersible up to 12 metres depth ACUARIA 07S 4 MA ESPA

Product description:

• Cylindrical, multistage, centrifugal pump for pumping clean water.
• Well pump designed for domestic, industrial, agricultural and gardening use.
• Suitable for working in open wells, ponds, and tanks for irrigation, transfer, and pressurisation.
• The maximum flow rate is 3900 l/h at a height of 6 m.
• The maximum pumping height is 41 m.
• It is recommended for use in clear water as the maximum solids passage is 2 mm.
• It can be submerged to a depth of 12 metres.
• The pump body, discharge, suction, and shaft are made of stainless steel.
• The maximum liquid temperature that the pump can withstand is 40ºC, thanks to the class F insulation of the motor.
• The pump motor is equipped with an IP68 protection system. If a product has a protection certificate, it means that it is equipped with insulation against dust, and that it can remain in contact with liquid for an indefinite period of time.
• It operates on electric power, single-phase, asynchronous two-pole type. It is supplied with 15 m of cable. It is directly water-cooled and has thermal protection for greater safety.
• It operates with a voltage of 1–230 watts and an electric current of 4 A.
• It has an output of 0.55 kW, 0.75 HP.
• Its dimensions are 12.5 cm diameter x 50.2 cm high. Delivery connection: 2.54 cm. Weighs 10.6 kg.
• Check valve not included.
• It has a level switch, which allows the motor to switch off when the volume of water is very low and not to work without water.
• Includes 15 m cable.
• This submersible pump includes a condenser for quicker start-up and shut-down of the motor.
• Some of the models available include an F-type plug, which has two circular legs and two grounding points, providing greater safety when connecting.
• It is necessary to choose the type of capacitor. By default, the internal capacitor with F-type plug is selected.
• The power supply is of type MA.

Capacitor Type:

• Internal Capacitor with F-plug: the capacitor is located inside the pump and has an F-plug.
• External Condenser without enclosure and without F-type plug: the condenser is located outside the pump, does not have a protective enclosure and the pump cable has no plug.

Options to choose from::