Speedrive V2 M22 ESPA Speedrive V2 M22 frequency inverter

Product description:

• Frequency variation equipment that works coupled to a water pump or pressure equipment. It is very useful to automatically regulate the water pressure in the house, building or any other installation.
• The body is made of aluminium and the front cover of technopolymer, a light but resistant plastic.
• The motor of this device is equipped with an IPX5 protection system. If a product has a protection certificate, it means that it is protected against water pressure jets.
• It operates on electric power, single-phase type. It is air-cooled. Includes 2 m cable with F-type plug for safety.
• It can regulate the pressure of up to 4 pumps.
• This equipment includes a USB port for updating the firmware. That is, the internal operating program that allows you to adjust the operation.
• It has 1 analogue 4-20 mA input that works with a voltage of 24V DC. In addition, it includes 1 digital input for the level switch.
• The output has 1 alarm signal and a potential-free output (FVC), which has a maximum current of 1A, NO/NC contacts.
• The equipment has a RS 485 serial port.
• The equipment includes a pressure transducer of 4-20 mA, supports up to 10 bar.
• It has a protection system with automatic reset that protects against dry running, overcurrent, short circuit, overtemperature and supply voltage.
• It is earthed and protected against communication and motor phase errors.
• It is protected by a fault detector for the pressure transducer.
• It is powered by a single-phase voltage of 230 V, with a current of 16 A.
• Its supply frequency is 50/60 Hz.
• A line protection of 25 A is recommended.
• This equipment can convert the input current into a three-phase voltage exerted by the 230 V motor, with a current of 10 A.
• The motor operates at a frequency of 50/60 Hz and can develop a maximum power of 2.2 kW.
• Its dimensions are 20.7 cm long x 20.7 cm wide x 17.8 cm high.
• It weighs 3.4 kg.