Ovian Plus Japanese smart toilet with automatic sensor, made of white ceramic Nashi

Product description:

• Japanese smart toilet with washing and drying functions integrated into the product.
• This product is 39 cm wide, 49 cm high and 68 cm deep.
• It is made of ceramic and ABS in white.
• The antibacterial seat is made of polypropylene.
• It works without a cistern. It features an innovative cyclonic system called Tank-Less: the water enters the bowl forcefully and symmetrically, cleans the entire interior surface of the toilet during the process and, in addition, does so with automatic flushing, saving up to 80% of the water that a conventional toilet would use.
• It incorporates LED courtesy lights in the back part of the seat that can be configured in the mode and time of your choice.
• It has an Easy-Click system: the basic functions can be used with a side joystick in a very easy and intuitive way, or with the remote control.
• Both the seat and the toilet seat cover are shock-absorbing to avoid knocks and breakages.
• It has heating: you can choose between 4 different temperature levels.
• It is equipped with two sensors with Contactless Technology: thanks to radar induction, the toilet seat flap opens when you approach it. You can choose between automatic flap lid or foot sensor. When your foot comes close to the button, the lid opens automatically. The lid closes when the person moves away, and also drains automatically.
• IPX4 protection rating: certified maximum water resistance.
• Rimless technology provides excellent washing results without splashing. It makes it easy to keep the bowl clean and saves water thanks to its small-diameter drain pipe.
• The ceramic has a 10-year warranty.
• Easy to install.
• Working pressure is 2.5 kg (20 litres per minute).
• The remote control is supplied with an adhesive support or screwed on screw. This remote control has the following options:
  • 1- Stop.
  • 2- Rear wash.
  • 3- Female wash.
  • 4- Drying.
  • 5- Washing nozzle position regulator.
  • 6- Drain.
  • 7- Pressure regulator.
  • 8- Short press: foam/Long press: eco mode.
  • 9- Seat opening/closing.
  • 10- Lid open/close. Long press: light on/off.
  • 11- Drying/seat/water temperature.

Functions:

• Water flows out through a stainless steel nozzle that makes small circles to provide better distribution and cleaning. This antibacterial and anticorrosive nozzle is self-cleaning before and after each use with UV sterilisation: ultraviolet disinfection. In addition, it can be disassembled for cleaning.
• For safety reasons, the germicidal lamp is only switched on when the lid is closed. When the lid is opened, the lamp switches off immediately.
• Thanks to the anti-splash foaming device, a disinfectant foam is automatically applied, which produces a layer of foam that prevents splashing.
• The water temperature can be adjusted in 5 levels: natural, 30º, 33º, 36º and 39º.
• The water jet pressure can be regulated in 5 different levels of intensity.
• The position of the nozzle can be adjusted in up to 5 different ways.
• The air temperature can also be varied, there are 5 options to select from.

Optional:

You must select the type of installation:

• Floor outlet drain (vertical). The distance from the wall to the floor hole (standard) is 20 cm.
• Wall outlet drain (horizontal).

Options to choose from::