Mini heat pump for swimming pool heating Gre

Product description:

• Mini heat pump, for heating swimming pool water.
• Suitable for above ground pools and for outdoor installation in a ventilated area.
• Does not require a by-pass kit.
• Installed after the filtration system.
• Ideal for temperatures between 12 and 42 °C.
• The power supply is 220-240 V, 50 Hz and 1 PH.
• The condenser is made of titanium in PVC.
• It is connected by 32 and 38 mm diameter hoses.
• The water pressure is 15 Kpa and the maximum/minimum working pressure is 4.2/0.05 Mpa.

Optional extras:

• Pump for maximum volume of 20 m³ (default option):
  • Its heating capacity is 2.5 kW.
  • The power consumption is 0.59 kW.
  • The nominal current is 2.6 A.
  • The recommended water flow rate is 2 m³/h.
  • The noise level at 10 metres / 1 metre is 48/57 dB(A).
  • It uses 160 g of R32 refrigerant.
  • The dimensions are 31.3 cm wide (E) x 42.85 cm high (D) x 36.45 cm deep (G).
  • Net weight is 18 kg.
• Pump for a maximum volume of 30 m³:
  • Its heating power is 4.2 kW.
  • The power consumption is 1 kW.
  • The rated current is 4.4 A.
  • The recommended water flow is 2 m³/h.
  • The noise level at 10 metres / 1 metre is 46/55 dB(A).
  • It uses 290 g of R32 refrigerant.
  • The dimensions are 43.5 cm wide (E) x 51.15 cm high (D) x 43.65 cm deep (G).
  • Net weight is 26 kg.
• Pump for a maximum volume of 40 m³:
  • Its heating power is 5.5 kW.
  • The power consumption is 1.31 kW.
  • The nominal current is 5.8 A.
  • The recommended water flow rate is 2.5 m³/h.
  • The noise level at 10 metres / 1 metre is 46/55 dB(A).
  • It uses 400 g of R32 refrigerant.
  • The dimensions are 51.5 cm wide (E) x 54.15 cm high (D) x 48.7 cm deep (G).
  • Net weight is 30 kg.

Options to choose from::