Muvit iO RGB solar garden light with motion detection, wifi and bluetooth connection

Product description:

• This solar light is ideal for installing on the lawn with its stake or hanging on the wall with its bracket.
• You can regulate the colour and intensity of the light remotely with the muvit iO app Home.
  • It also allows interaction via mesh networks.
  • The app is compatible with iOS and Android.
• Its battery can be charged with the solar panel or via USB.
  • It includes a USB Type-C input and a suitable charger. In this way, the battery can be charged in 1.5 hours.
  • The Muvit iO app Home allows you to monitor the battery percentage in real time.
• The motion detector enables automatic switching on and off of the light.
• Allows several easy installation possibilities.
  • Includes a stake for installation in the lawn.
  • Can be mounted on the wall with screws thanks to its integrated base.
  • It can also be easily hung on any surface.

Technical data:

• This solar lamp is manufactured with IP65 protection.
  • This allows complete waterproofing against liquids and protection against dust.
• The working voltage for this light is 5 V.
• On charge the device has a power consumption of 5 W, while the lamp has a power consumption of 1.5 W.
• The light has an automatic on/off function.
• The luminous flux of the lamp is 100 lm.
  • Its light beam operates at an angle of 360°.
• The colour temperature range of the light is from 2700 K to 6500 K.
• The USB charger is type C and has a power rating of 5V and 1A.
• The solar panel has a charging power of 5 V-mA.
• The product has a built-in motion sensor.
  • It has a range of 8 metres and a maximum detection angle of 120°.
• The Bluetooth protocol for mesh connections is 4.2.
• With the lawn stake installed, it measures 15.9 cm in diameter and 27 cm in height.
• The battery has a maximum storage of 1300 mAh and an autonomy of 4 hours.
• Its manufacturing material is abs plastic, polycarbonate and silica gel.
• Its energy classification is category G.
• Depending on the state of use of the battery, it can take between 5 and 10 minutes for the charging LED to light up.
• In case of using the solar panel, this lamp must receive direct sunlight for at least 8 hours a day to fully charge its battery.