Sound transducer for fixed mounting with relay and control output PCE Instruments

Product description:

• This sound transducer is the ideal instrument to convert sound frequencies into electrical frequencies.
• It is ideal for controlling sound pressure measurement in recreational or workplaces (e.g. factories or discotheques).
• It has a hand-held measuring microphone and is for fixed wall mounting.
• It has an alarm function for user-set maximums.
• It has a memory with data logging for later analysis.
• It is delivered pre-configured for immediate use.
• Delivery includes 1 sound transducer, 1 noise sensor with 1.5 m cable, 1 noise transmitter, 1 digital display, 1 sensor holder and 1 manual.

Technical data:

• Microphone: 1/2 inch Electret precision.
  • Measuring range: 30 to 130 dB in three ranges.
  • Resolution: 0,1 dB
  • Accuracy: ± 1.5 dB
  • Rating: A
  • Power supply: via transmitter
  • Cable length 1.5 m
  • IEC 651 type II standard (class II)
• Transmitter with ABS plastic housing
  • Power supply: from 90 to 260 ACV (max. 1.5 A)
  • Calibration: adjustable by means of grub screw
  • Output: 4 to 20 mA.
  • Protection class: IP 54 waterproof and dustproof.
• Digital display 100 mm wide x 50 mm high and 250 g.
  • Transmitter input signal: 4 - 20 mA.
  • Display: - 1999 to 9999 with 1 to 3 decimal places, depending on the measured value.
  • Saves programming data.
  • Control output: 3 points (Com, NO, NC)
  • Alarm output: 5 A / 240 VAC relay output
  • Power supply: 90 to 260 VAC or 50 to 60 Hz.
  • Protection type: IP 65, protected against dust and water jets.
• All-transducer operating conditions: 0 to 50 °C with a maximum humidity of 85% RH.

Optional:

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::