Accelerometer with LCD display with 4 measuring parameters PCE-VT 3900S PCE Instruments

Product description:

• This accelerometer is an ideal product, as it enables vibration, speed and displacement of various components to be counted.
• Suitable for measuring revolutions in rotating machines and installations, excellent for detecting faults in them.
• It has 4 measurement parameters and also performs FFT analysis.
• A measurement path mode can be activated, which allows to observe the changes of the same element over time.
• It has a manual data logger and an internal memory that can be transferred to a computer.
• It also has a wide choice of languages, including English, German, French, Spanish, Italian, Dutch, Portuguese, Turkish, Polish, Russian, Chinese and Japanese.
• It can be connected to a computer and the data can be viewed via software.
• It has a 2.48-inch LCD colour display.
• It measures 8.5 cm wide x 16.5 cm high x 3.2 cm deep.
• Its weight is 239 g, without the cable 119 g.
• The housing material of the meter is stainless steel.
• Delivery includes: 1 accelerometer, 1 sensor, 1 needle sensor, 1 spiral cable, 1 Micro USB cable, 1 USB stick, 1 manual with software and 1 pouch-type case.

Technical data:

• Acceleration measuring range: 0 to 399.9 m/s².
  • Resolution: 0.1 m/s².
  • Accuracy in 160 Hz range: ±2 %.
  • Frequency range: 1 kHz to 10 kHz and 10 Hz to 10 kHz.
• Velocity measurement range: 0.00 to 3.9 mm/s:
  • Resolution: 0,1 mm/s.
  • Accuracy in 160 Hz range: ±2 %.
  • Frequency range: 10 Hz to 200 Hz.
• Displacement measurement range: 0.000 to 3.9 mm.
  • Resolution: 1 µm (micrometer).
  • Accuracy in 160 Hz range: ±2 %.
  • Frequency range: 10 Hz to 200 Hz.
• Revolutions per minute measurement range: 600 to 50000 RPM.
• FFT analysis:
  • FFT acceleration: 10 Hz to 8 kHz.
  • FFT Velocity: 10 Hz to 1 kHz.
  • 160 Hz range frequency pressure: ±2 %.
  • Number of lines: 2048
• Measurement paths: 100 paths per 100 machines with 100 measurement points at 100 values each.
• Its 4 measurement values are:
  • RMS voltage.
  • Highest buffers.
  • Highest buffer to highest buffer.
  • Peak value.
• Power supply:
  • LiPo 3.7 V and 2500 mAh (autonomy from 10 to 20 hrs depending on use).
  • Or mains connection via USB 5 VDC/ 500 mA.
• Operating and storage conditions: -20 to 65 °C and 10 to 95 % humidity.
• Vibration sensor:
  • Resonant frequency: 24 kHz.
  • Transverse sensitivity: less than or equal to 5 %.
  • Maximum measurement limit: 5000 g.
  • Operating and storage conditions: -55 to 150 °C.
  • With a thread size of 28 inches Ø 29x81 mm.

Optional:

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::