12 and 24 V solar charge controller with 30 A current BlueSolar PWM-Pro Victron Energy

Product description:

• This is a solar charge controller, model BlueSolar PWM Pro.
• It is fully programmable and comes ready to use with default settings.
  • It can be configured using a computer and software from Victron which is available on their website.
  • Using the BlueSolar-Pro remote panel.
• It has the following functions:
  • Programmable lighting control.
  • Three-stage battery charging:
    • Initial.
    • Absorption.
    • Floating.
  • Integrated battery monitoring (requires remote panel to view state of charge).
  • With load output disconnection function in case of low battery voltage and manual control.
  • Optional external temperature sensor.
• Protected against overheating and short circuits.
• Protected against reverse polarity of solar panels and/or battery.
• Battery voltage is 12/24 V.
• The charging current is 30 A.
• The working temperature range is -20 to 50 °C.
• Battery data:
  • Absorption charging voltage 14.2 V / 28.4 V.
  • Float charge voltage of 13.8 V / 27.6 V.
  • Low-voltage disconnection of 11.2 V / 26.2 V.
  • Low voltage load reconnection of 12.6 V / 25.2 V.
• The dimensions are 100 mm wide, 200 mm high and 57 mm deep.
  • The terminals measure 10 mm².
• It has an IP20 degree of protection.
• Weighs 0.5 kg.
• Safety standard: IEC 62109-1.