48V Solar Charge Controller with 450V MPPT and 200A current blue steel MPPT RS SmartSolar Tr Victron Energy

Product description:

• This is a solar charge controller, model MPPT RS SmartSolar Tr.
• Designed for systems with large PV (photovoltaic) arrays connected in series charging 48 Vdc batteries.
• Ideal for off-grid or grid-connected battery systems.
• Features:
  • Solar operating voltage input between 80 and 450 Vdc.
  • Independent tracking inputs.
  • Full connectivity.
  • Isolated photovoltaic connections.
  • A display with fully programmable battery charging parameters.
  • Active cooling.
• Can be remotely controlled and configured via Bluetooth from the VictronConnect app.
  • Device configuration and management.
  • Information at a glance:
    • Battery voltage and current, PV voltage and current, trends and historical data.
• VE.Can bus ports are available, allowing communication with other RS SmartSolar and MPPT VE.Can units.
  • Up to twenty-five units can be connected in parallel.
  • They are daisy-chained via an RJ45 cable.
  • Once they are connected to each other, they will synchronise their charging phases.
  • Through the same cable, data can be sent to a GX device for monitoring.
• With VE.Direct port.
• If the GX device is connected to the internet, the Victron Remote Management portal will allow access to the full power of the charge controllers.
• Equipped with a front-facing display.
  • Provides readings of battery volts.
  • Current.
  • Charging voltages of both sets separately.
  • Unit status, including possible error codes.
• Programmable relay and remote sensing of temperature and voltage.
  • Compatible with BMS devices.
• With various MPPT trackers.
  • The MPPT RS can detect faults that reduce the insulation of the panels, continuously monitoring the PV array.
• With full galvanic isolation between the battery and PV connections, providing additional safety.
• Low standby power consumption and silent.
• It has a TR type PV terminal, one positive and one negative screw terminal.
• The nominal voltage of the battery is 48 V.
• The rated charging current is 200 A.
• Maximum charging power is 11.5 kW at 57.6 V.
• Absorption charge voltage of 57.6 V (adjustable).
• Float charge voltage of 55.2 V (adjustable).
• Self-consumption of 15 mA.
• Maximum PV voltage is 450 Vdc.
  • Start-up voltage of 120 V.
  • MPPT voltage range 80 - 450 V.
  • With four trackers.
    • Maximum PV operating input current of 18 A per tracker.
    • Maximum PV short circuit current of 20 A per tracker.
  • Maximum output load power 11520 W.
• Bluetooth frequency 2402 - 2480 MHz.
• It is made of steel with blue finish.
• Its measurements are 434 mm wide, 487 mm high and 146 mm deep.
• Its degree of protection is IP21.
• It weighs 13.7 kg.
• Safety standard EN-IEC 62109-1, EN-IEC 62109-2.