AGM C20 battery with 60Ah capacity and 12V AGM Deep Cycle voltage Victron Energy

Product description:

• This is a 12V C20 battery, AGM "Deep Cycle" model.
• It is a low internal resistance battery, ideal for applications where a high discharge current is required, e.g. inverters, boosters, motor starters and winches.
• This battery is hermetically sealed, with VRLA technology.
• There will be gas leakage at the safety valves only in the event of overcharge or component failure.
• It is maintenance free.
• AGM stands for "Absorbent Glass Mat".
• In these batteries, a glass fibre mat is placed between the plates, which absorbs the electrolyte by capillary action.
• It is suitable for supplying high currents for short periods.
• This battery can be stored for a long time, thanks to the use of lead-calcium grids.
• The self-discharge rate is less than 2% at temperatures of 20 °C.
• The self-discharge rate doubles for every 10 °C increase.
• In a cool environment, this battery can be stored for one year without recharging.
• Even after deep discharge, this battery has an outstanding recovery capacity.
• Note: Frequent deep or prolonged discharges have negative consequences on the service life of the battery.
• At temperatures of 20 °C the battery has a service life of 7 to 10 years.
• It has a nominal capacity of 60 Ah.
• For a discharge of 20 hours, it can deliver a voltage of 10.8 V.
• Its depth of discharge is 100 %.
• The cold start current is 280 Cca.
• Per normal cycle, the absorption voltage is 14,2 - 14,6 V.
  • The float voltage is 13.5 - 13.8 V.
  • And the storage voltage is 13.2 - 13.5 V.
• In fast recharge cycles, the absorption voltage is 14.6 - 14.9 V.
  • The float voltage is 13.5 - 13.8 V.
  • The storage voltage is 13.2 - 13.5 V.
• CAP. RES. is 80 Ah.
• It is 229 mm wide, 227 mm high and 138 mm deep.
• Weighs 20 kg.