Victron Energy LifePO4 12.8V smart lithium battery with 92% efficiency and 200 Ah LifePO4 C1

Product description:

• This is a 12.8V lithium iron phosphate C1 battery.
• With built-in cell balancing.
• It allows series connection of up to four 12V or two 24V batteries.
• And in parallel it supports up to five batteries.
  • Cell balancing/control cables can be daisy-chained and requires connection to a battery management system (BMS).
• It is smart, so you can control and monitor from the Victron bluetooth app.
  • Control of voltage, cell temperature and alarm status.
• It is an ideal choice due to its long lifetime.
  • It does not need to be fully charged.
  • Its lifetime will improve if it is partially charged and not fully charged.
• It has a wide working temperature range, good cyclic performance and low internal resistance.
• It is suitable for demanding applications.
• The full cycle energy efficiency (discharge from 100% to 0% and recharge to 100%) is 92%.
  • Under mild discharge conditions, the efficiency will remain at 90%.
• Nominal voltage is 12.8 V.
• The nominal capacity at 25 ºC is 200 Ah.
• The nominal capacity at 0 ºC is 160 Ah.
• The nominal capacity at -20 ºC is 100 Ah.
• The nominal power at 25 ºC is 2560 Wh.
• With capacity for:
  • 2500 cycles at 80% discharge.
  • 3000 cycles at 70% discharge.
  • 5000 cycles at 50% discharge.
• The maximum recommended discharge current is 400 A.
• The recommended continuous discharge current is ≤200 A.
• The final discharge voltage is 11.2 V.
• The internal resistance is 0.8 mΩ.
• When discharging, it operates at temperatures from -20 to 50 ºC.
• When charging, it operates at temperatures from 5 to 50 ºC.
• The storage temperature is -45 to 70 ºC.
• It has IP22 degree of protection.
• The charging voltage range is 14 V / 28 V and 14.4 V / 28.8 V.
  • 14.2 V/28.4 V is recommended.
• The float voltage is 13.5 V / 27 V.
• The maximum charging current is 400 A.
• The recommended charging current is ≤100 A.
• The maximum storage time of this battery is 1 year at 25 °C.
• The threaded inserts for the electrical connection have an M8 bolt.
• For the BMS connection a male cable and strand with M8 circular connector is included.
  • It measures 50 cm.
• Its dimensions are 321 mm wide, 237 mm high and 152 mm deep.
• It weighs 20 kg.