Hover over the image to zoom in
Beige PVC expansion joint profile 3 cm by 250 cm for interior and exterior floor movement joints Emac
Brand: Emac - NJ1PV30BE
Sold by: Habitium
At Habitium, all orders are sold and managed directly by us, so you will never have to deal with third-party sellers.
Product details
- Material: Coextruded PVC composed of a rigid body and a flexible body, allowing absorption of small movement variations in floors without losing mechanical strength.
- Arrow shaped design: Facilitates mortar bedding and provides stable support to the tile, improving the durability of the installation.
Payment methods and financing
Ask a question about this product
Average response time: 4 working hours
Product details - Beige PVC expansion joint profile 3 cm by 250 cm for interior and exterior floor movement joints Emac
- Material: Coextruded PVC composed of a rigid body and a flexible body, allowing absorption of small movement variations in floors without losing mechanical strength.
- Arrow shaped design: Facilitates mortar bedding and provides stable support to the tile, improving the durability of the installation.
- High density zone: Provides the rigidity required to support the flooring, ensuring correct fixing and long term stability.
- Upper low density zone: Allows movement without permanent deformation thanks to its high elastic limit, absorbing thermal expansions and contractions.
- Beige colour: Neutral finish that visually blends with most floor coverings, maintaining a uniform aesthetic.
- Dimensions: 3 cm (width) x 250 cm (length).
- For exterior use: Close maximum areas of 16 m2 with joints spaced no more than 5 linear metres to avoid damage from thermal variations.
- For interior use: Close maximum areas of 40 m2 with joints spaced no more than 8 linear metres due to lower thermal changes.
- Installation: If floor polishing is required, install the joint slightly below floor level to avoid damage to the profile.
Product classification::
SKU: 8430089012236, NJ1PV30BE