Corner shower enclosure with 2 sliding and 2 fixed panels 6 mm toughened safety glass height 195 cm BASIC GME

• Product type: Corner shower enclosure model BASIC by GME formed by four panels consisting of two sliding leaves and two fixed panels with vertex opening for easy access.
• Dimensions: Front 65–139 cm (length) x Side 65–120 cm (width) x Height 195 cm (depth).
• Glass: Manufactured in 6 mm toughened safety glass for a more elegant finish and safe breakage behaviour where glass fragments remain within the structure.
• Profiles and finish: Polished aluminium profiles and fittings with Silver Bright finish and minimalist straight lines, with no lower guide visible.
• Opening system: Sliding doors run on top guide rollers with ball bearings for smooth operation and stability.
• Closure system: Magnetic closure provides comfortable and watertight sealing when the doors are shut.
• Adjustment: Vertical profiles 2.3 cm wide allow on site adjustment to compensate for wall irregularities.
• Sealing elements: Includes vertical water seals between sliding leaf and fixed glass, plus a lower rubber waterstop for the sliding door and a metal waterstop 1 cm high by 0.6 cm wide to fit on the tray, both supplied with the enclosure.
• No lower guide: The enclosure is designed without a bottom guide, and installers must fit the included lower rubber and metal waterstop to ensure proper watertightness.
• Cleaning convenience: Integrated leaf release system in the lower guide allows the doors to be freed from the bottom retention for easy cleaning.
• Reversible design: The enclosure is reversible so it can be installed with either orientation to suit the bathroom layout.
• Anti limescale treatment: EnduroShield anti limescale treatment is included as standard, using nanotechnology to create a permanent invisible protective layer that eases cleaning.
• Available size packs: Predefined combinations adapt the top guide and door overlap to create sizes such as 70x70 75x70 80x70 90x70 100x70 120x70 80x80 90x80 100x80 120x80 90x90 100x90 and 120x90, with front and side measurement ranges as specified above.
• Installation note: The top guide must be cut on site to fit the required aperture and a metal cutting saw for steel is sufficient for this task.
• Aftercare and support: GME supplies all necessary spare parts and offers specialised technical service for installation and reception; a three year warranty extension is available subject to terms and excluding plastic parts and bearings.

Options to choose from::