Ko Jets shower and hydromassage column Sagobar

Product description:

• Ko Jets shower column made of aluminium and stainless steel chassis

• Includes gel holder shelf for added convenience.

• Aluminium finish in matt white.

• Upper spray head with rain effect jets 22 x 7 cm.

• Six hydromassage jets with spray effect.

• The column has the following measurements: 20 cm + 26 cm wide x 115 cm high and a maximum shower outlet of 53 cm.

You can choose between the following types of taps:

• Single lever mixer.

• Thermostatic.

Recommendations for installation and proper use:

• The shower column has a wall installation and cannot be placed in corners.

• It is recommended to have a pressure between 3 to 5 bars. The difference between the hot and cold water pressure should not exceed 1 bar.

• The minimum water flow should be 15 to 17 litres per minute.

• It is suggested to install an anti-limescale system for longer life.

• Before and after installation, careful attention should be paid to the possible pinching of the hoses.

• Water intakes are recommended at 120 cm from the floor.

• Before connecting the hot and cold water, it is preferable to bleed the pipes.

• The columns are supplied with connection hoses for their installation, check that they are not damaged in order to take advantage of the maximum water flow.

• It is advisable to clean the filter of the thermostatic columns every 5 months.

Options to choose from::