Force gauge for tensile and compression measurements up to 50 N FM 50N PCE Instruments

Product description:

• The dynamometer is an accurate microprocessor-controlled force gauge.
• It has an internal load cell for tensile and compression measurements up to 50N.
  • The thread is M6.
• It has an easy to read display.
• It is powered by an internal accumulator which is charged by an external power supply.
• It has a USB interface for data transmission.
• With peak value measurement.
• Delivery includes:
  • 1 Dynamometer PCE-FM 50N.
  • 1 Software.
  • 1 USB cable.
  • 1 Flat head adapter.
  • 1 Hook adapter.
  • 1 Tip head.
  • 1 Blade head.
  • 1 V-head.
  • 1 Extension rod (65 mm).
  • 1 Charger.
  • Carrying case.
  • Instruction manual.

Technical data:

• Range 0 to 50 N.
• Resolution 0.01 N.
• Pressure calibration of 0.1 Mpa.
• Internal load cell with M6 thread.
• Range 1 to 100 % of full scale.
• Accuracy ± 0,5 %.
• Units: N, kg, lb.
• LCD display.
• Power supply by means of internal accumulator and 12 V, 1 A mains adapter.
• Operating temperature from +10 to +30 °C.
• Relative humidity 15 to 80 % RH.
• Working conditions: the device must not be placed near sources of vibration or corrosive materials.
• Weight 1 kg.

Optional:

• Clamping device for testing machine (PCE-SJJ03).
  • For tensile testing of rubber, wires and cables, paper, plastic film, etc.
  • Capacity 500 N.

• Clamping device with soft jaws (PCE-SJJ024).
  • For tension testing of paper, film, etc.
  • Capacity 500 N.
  • Diameter 5 mm.

• Adapter ring for tensile test (PCE-SJJ02).
  • Capacity 0.5 kN.
  • Diameter of 20 mm.

• Motorised test stand PCE-MTS500).
  • Almost all compression and tensile applications can be performed repeatably.
  • The maximum force range is 500 kg.
  • Maximum working length 300 mm.
  • Feed speed from 30 mm/min to 230 mm/min.
  • Manual or automatic use.

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • When ordering, please contact the customer service team and indicate the calibration information required.
  • Calibration service is non-returnable.

Options to choose from::