5200 W 48 V solar inverter module with LCD control display and wifi connection IFR5200 Genergy

Product description:

• Detachable control module with various communications.
• Equipped with LCD liquid crystal display.
• Incorporates WiFi connection for mobile monitoring via the app.
• Operates with the battery disconnected.
• Supports USB On-the-Go (OTG) function for greater connection flexibility.
• Its dimensions are 45 cm wide, 15 cm high and 55 cm deep.
• It has a weight of 18 kg.
• Allows battery equalisation, to extend the battery life cycle.
• It has a replaceable fan.

Technical data:

• Its rated power is 5200 VA / 5200 W.
• Recommended batteries are GENERGY LFP5120-48, with a range of 2 to 15 units.
• Maximum storage capacity varies between 10240 Wh and 76800 Wh.
• Input voltage is 230 VAC.
• Selectable voltage range is 170-280 VAC for personal computers and 90-280 VAC for home applications.
• Frequency range is 50 Hz or 60 Hz, with automatic detection.
• Output voltage is 230 VAC, with ±10% variation.
• Momentary peak reaches 10000 VA / 10000 W.
• Maximum efficiency is between 90% and 93%.
• The transfer time is 10 ms for personal computers and 20 ms for home applications.
• The waveform is a real pure wave.
• Battery voltage is 48 VDC.
• Floating charge voltage is 54 VDC.
• The overload protection is set to activate at 63 VDC.
• The solar charging system is MPPT type.
• The maximum solar power is 6000 W.
• The MPPT voltage range is between 150 and 430 VDC.
• The maximum open circuit voltage is 450 VDC.
• The maximum input current for the photovoltaic (PV) system is 27A.
• The maximum solar charging current is 100 A.
• The maximum AC load current is 80 A.
• The maximum overall load current is 100 A.
• Net weight is 18 kg.
• Communication interface includes USB, RS232, RS485, WiFi and Dry-contact.
• The supported humidity range varies from 5% to 95% relative humidity, non-condensing.
• The operating temperature ranges from -10 °C to 50 °C.
• The storage temperature can range from -15 °C to 60 °C.