Inverter with solar charger 48 V and 6000 VA made of steel, blue finish RS Smart Solar Victron Energy

Product description:

• This is an inverter with high voltage solar charger.
• It is quiet in operation and has low standby power consumption.
• Ideal for off-grid solar applications where AC power is required.
• It has a display that shows the parameters about:
  • The battery.
  • The inverter.
  • The solar charger (adjustable controller).
• These parameters are available for reading via Bluetooth in the VictronConnect app.
• The inverter has a VE.Can port that allows connection to a GX device for system monitoring.
  • In addition, it has a VE.Direct port for connection to a GlobalLink 520.
• This inverter produces a sine wave that is capable of powering high-power devices.
  • This sine wave is supplied by a bidirectional DC-DC (direct current to direct current) converter that charges the battery when there is excess solar power.
  • Or it can convert power from the battery when needed.
• It is equipped with two parallel photovoltaic strings, connected to MC4 sockets.
  • They can be safely isolated with an integrated switch.
• It has connections for: programmable relay, temperature and voltage sensor.
  • Allows remote input configuration for compatibility with Victron smallBMS.
• It is made of steel with blue finish.
• Its measurements are 440 mm wide, 425 mm high and 125 mm deep.
• Its nominal voltage is 48 V.
• The apparent power is 6000 VA (volt-amperes).
• Peak power is 9 kW / 3 seconds.
• Its input voltage range is 38 - 62 Vdc.
• Its output voltage is 230 V.
• Frequency is 50 Hz.
• The peak photovoltaic input power is 4000 W.
  • Its voltage range is 80 - 450 V.
  • Load current of 20 A.
• IP21 protection.
• Weighs 11 kg.
• Type A and G electrical protection.
• Safety standard: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
• It is easy to assemble.