Power inverter with VEDirect port 48V and 1200VA made of steel and blue plastic Phoenix Victron Energy

Product details:

• This is an inverter designed to power household equipment at 230/120 V.

• Equipped with a VE.Direct port that can connect to:

• A computer (requires a VE.Direct to USB interface cable).
• Apple and Android smartphones, tablets, and MacBooks (requires a VE.Direct to Bluetooth Smart dongle).
• Configurable settings include:
• Alarm trigger and reset levels for low battery voltage.
• Disconnection and reconnection levels for low battery voltage.
• Load-dependent disconnection level.
• Output voltage setting between 210 and 245 V.
• Frequency: 50 or 60 Hz.
• ECO mode on/off and ECO mode level sensor.
• Allows monitoring of:
• Input/output voltage and current, load percentage, and alarms.
• Short-circuit proof and protected against overheating.
• Delivers high peak power.
• ECO mode puts the inverter in standby when the load drops below a preset threshold (minimum load: 15 W).
• Once in standby, the inverter activates intermittently at a configurable interval (default: every 2.5 seconds).
• If the load exceeds the preset level, the inverter resumes standby.
• Supports connection to a remote on/off switch.
• Can be connected via a bipolar connector or between the battery positive terminal and the left contact of the bipolar connector.
• Includes LED diagnostics.
• Fitted with a Schuko outlet.
• Constructed with a steel chassis and plastic casing, finished in blue.
• Dimensions: 232 mm wide x 1117 mm high x 327 mm deep.
• Nominal voltage: 48 V.
• Apparent power: 1200 VA.
• Peak power: 2200 W.
• Adjustable output voltage: 230 to 120 V AC.
• Adjustable frequency: 50 or 60 Hz.
• IP21 protection rating.
• Weight: 7.4 kg.
• Electrical protection types A and F.
• Meets safety standards: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3).
• Easy to install.