Benchtop drill with 550 Watt motor and B20 Optimum belt drive

Product description:

• Column and tabletop drill with drill depth stop.
• Its measurements are 35 cm wide, 99 cm high and 60 cm deep.
  • The base is 20 cm wide and 20.5 cm deep.
  • The table measures 27.5 cm on each side.
• It has an IP54 protection switch, separate emergency stop button and minimum voltage trigger.
• Stable workbench with transverse T-slots, tiltable up to +/-45° and 360° swivelling.
• It has an aluminium pulley and sharp six-toothed stops.
• Contains long lever handles of sliding design.
• Allows operation in two directions.
• Has a concentricity accuracy of <0.03 mm.
• With quick-action chuck.
• The approximate weight of this product is 53 kg.

Technical data:

• Motor power: 550 W / 230 V.
  • No. of speeds: 12.
• No. of spindle revolutions: 210 - 2220 rpm.
• Spindle / taper: MK 2.
• Bore diameter in cast iron/steel: 20 / 18 mm.
• Stroke of the pin: 80 mm.