7-speed pillar drill with ergonomic lever system and Optimum turntable

Product description:

• This is an industrial pillar and tabletop drill for metal.
• It has a safety screen that can be adjusted in height, preventing possible shavings impacts.
• It is quick tool change, thanks to its integrated ejector system.
  • In addition, it has a quick and easy extraction device.
• Its V-belts have a durability of 10,000 working hours.
• With ergonomic one-piece lever system, made of aluminium.
• Its spindle has precision ball bearings.
• Its table is large, has diagonal T-shaped slots and can be rotated 360º.
• It includes an approved safety system with emergency stop.
  • With 24 V switches.
• Its chuck is made of steel and has three levers.
• It has a lighting system on the work table.
• Up to 7 speeds can be changed.
• Included in delivery is a quick-clamping drill chuck (1 to 16 mm), a steel table with two T-slots for T-nuts and a MK 2 Morse taper.

Technical data:

• The motor power is 850 W.
• Its voltage is 400 V.
• The overall dimensions are 66.5 cm wide, 99.8 cm high and 43.4 cm deep.
  • The base is 28 cm wide and 26 cm deep.
  • The table is 28 cm wide and 30 cm deep.
    • The T-slots on the table measure 1.4 cm.
• The maximum distance from the chuck to the column is 16.5 cm.
• The maximum distance from the spindle to the base is 68.1 cm.
  • From the spindle to the table the maximum distance is 51.5 cm.
• The column is 8 cm in diameter.
• The maximum drilling diameter in steel is 2 cm.
• The maximum drilling diameter in cast iron is 2.4 cm.
• The stroke of the spindle is 8.5 cm.
• Spindle speed is 350 - 4000 rpm.
• Net weight 84 kg.