Viscometer with integrated spirit level, LCD display and four spindles RVI 2 PCE Instruments

• Analogue viscometer, robust and mobile design, for determinations in printing inks, lacquers, pastes and foodstuffs.
• It determines the viscosity using a mechanical resistance acting in the opposite direction to the rotational movement of the spindle.
• For checking alignment, it has a spirit level.
• The dimensions are 300 mm wide, 450 mm high and 300 mm deep.
• The weight is 1.5 kg.
• Included in delivery:
  • Viscometer PCE-RVI 2.
  • Set of spindles L1 to L4.
  • Carrying case.
  • Double-ended spanner.
  • Mains adapter.
  • Instruction manual.

Technical data:

• Measuring ranges from 20 to 100,000 mPa.s.
• Accuracy ±2 % F.S.
• Resolution 0,01 cp.
• Repeatability of ±0,5 %.
• The rotors or spindles are Nos. 1 - 4.
  • It has adjusting feet for correct levelling so that it is always in a vertical position.
• The rotation speed is adjustable in a range from 6 to 60 rpm.
  • Values of 6, 12, 30, 60 rpm.
• Measurement time can be programmed from 30 seconds to 1 hour or infinite.
  • Resolution of 30 seconds.
• Immersion temperature sensor determines the sample temperature in the range from 0 to 100 °C during measurement (not included).
  • Accuracy of 0.1 °C.
  • This is important as the properties of many materials change with heat.
• The height of the viscometer can be adjusted by 25 cm in order to position the spindle properly.
• The test volume ranges from 250 to 400 ml (depending on the spindle).
• Power supply 220 VAC and 50 Hz.
  • Input 100 to 240 V AC and 50/60 Hz.
  • Output 12 V DC and 2 A.
• RS-232 interface (SUB D9).
• Ambient conditions are 5 to 35 °C and <80 H.r. without condensation.