SSPC thickness gauge with temperature and humidity measurement PCE-CT 29 PCE Instruments

Product description:

• This is a portable thickness gauge for measuring the thickness of layers, ferrous (Fe) and non-ferrous (NFe).
• It has a memory, statistics and alarm functions.
• This device can also measure the temperature and humidity of the environment.
• It has a 2.4-inch LCD display.
• The memory of this thickness gauge consists of 50 groups with 50 measurement values each.
• It has a V-shaped slot in which the sensor can measure the thickness in pipes.
• If the limit values (upper or lower) are exceeded, an acoustic and/or visual alarm can be triggered.
• It has an automatic switch-off function that can be set to 30 seconds, 1 minute, 5 minutes or off.
• Its display can automatically rotate between 0°, 90°, 180°, 270° or simply deactivate it.
• The menu has different languages: Chinese, English, French, German, Italian, Japanese, Portuguese, Spanish and Chinese.
• The dimensions are 6.4 cm wide, 13.7 cm high and 3.5 cm deep.
• Delivery includes:
  • SSPC thickness gauge.
  • Set of calibration standards.
  • Ferrous base.
  • Non-ferrous base.
  • USB device with software.
  • 2 batteries of 1.5 V AA type.
  • Carrying case.
  • Instruction manual.

Technical data:

• For measurements of ferrous (Fe) metal bases it has the following specifications.
  • The measuring range is 0 to 2000 µm.
  • The resolution is 0,1 µm (less than 100 µm) and 1 µm (between 100 µm and 2000 µm).
  • The accuracy is ±(2 % ±2 µm of the value).
  • Repeatability is ±(1 % ±1 µm of the value).
  • The minimum radius of curvature is 1,5 mm.
  • The minimum thickness of the base is 0,5 mm.
  • The minimum measuring surface is Ø7 mm diameter.
• For measurements of non-ferrous metal bases (NFe) it has the following specifications.
  • The measuring range is 0 to 2000 µm.
  • The resolution is 0.1 µm (less than 100 µm) and 1 µm (between 100 µm and 2000 µm).
  • The accuracy is ±(2 % ±2 µm of the value).
  • Repeatability is ±(1 % ±1 µm of the value).
  • The minimum radius of curvature is 3 mm.
  • The minimum thickness of the base is 0,3 mm.
  • The minimum measuring surface is Ø5 mm in diameter.
• For temperature measurement it has the following specifications.
  • The measuring range is 0 to 50 °C and 32 to 122 °F.
  • The resolution is 0.1 °C / °F.
  • Its precision is ±1.2 °C / ±2.2°F.
• For humidity measurement it has the following specifications.
  • The measuring range is 0 to 100 % RH.
  • The resolution is 0.1 % RH.
  • The accuracy is ±3.2 % RH (between 20 and 70 % RH), ±4 % RH (between 0 and 19.9 % RH) and ±4 % RH (between 70.1 and 100 % RH).
• Statistical functions are MIN, MAX or Average.
• It has three measurement modes: direct, groups or SSPC.
• It can be configured to take measurements in
  µm, mm, mils and inch.
• It is powered by 2 x 1.5 V AA batteries.
• It has a micro USB interface.
  • This interface allows data transfer.
• Its operating conditions are 0 to 50 °C and 20 to 90 % R.H. (non-condensing).
• Storage conditions are 10 to 60 °C and 20 to 90 % R.H. (non-condensing).