Motorised load cell testing machine with digital load cell and caliper MTS500-DFG N 5K FD 300 KIT PCE Instruments

Product description:

• Almost all compression and tensile applications can be performed with this device, repeatably.
• Robust steel design, very strong.
• The maximum force range of the testing machine is 5000 N.
• It can be combined with variants of other force testers of the PCE series and with internal or external load cell.
• For the use of the device, electrical connection is required.
• The feed speed can be selected between 30 mm/min and 230 mm/min.
• For manual or automatic use.
• It has a dynamometer that measures tensile and compressive forces with a high resolution.
  • With external load cell and USB interface for PC connection.
• Also includes a digital caliper with software.
  • This is a tool for obtaining force and travel diagrams.
• It has a memory for 100 measurements.
• Delivery includes:
  • 1 PCE-MTS500 test stand.
  • 1 PCE-DFG N 5K dynamometer.
  • 1 PCE-DFG FD 300 digital caliper for measuring displacement.
  • 1 Stand (consisting of 11 pieces).
  • 1 Mounting kit (made up of 24 screws and 2 headless screws).
  • 1 Measuring system.
  • 1 Data cable.
  • 1 USB stick with software.
  • 1 Load cell.
  • 2 bolts.
  • 1 USB cable.
  • 1 Power supply.
  • 3 Instruction manuals.

Technical data:

Motorised test stand.

• Maximum force range 5000 N.
• Max. working length 300 mm.
• Feed speed 30 to 230 mm/min.
• Hand wheel Ø 160 mm.
• Maximum permissible test thickness 200 mm.
• Guide columns Ø 32 mm.
• Dimensions 40 cm wide, 102 cm high and 25 cm deep.
• Approximate weight 60 kg.

Dynamometer.

• Range 0 to 5000 N.
• Resolution of 1 N.
• Accuracy of ±0.1 % F.S.
• Units used: N, kg, lb, KPa.
• 2.8" TFT graphic display.
• Alarm modes included: input, output, breakage and shutdown.
• Measuring rate from 6 to 1600 Hz.
• Memory of 100 series with 8000 values per series
• Power supply via NiMh battery, 6 V and 1600 mAh.
• Battery operating time approx. 10 hours.
• Adapter for 12 V, 1 A power supply.
• Outputs: USB interface and 12 V and 50 mA switching outputs.
• Degree of protection IP 54.
• Ambient conditions from -10 to 50 °C and 5 to 95 % R.H. without condensation.
• Load cell thread type M12.
• Dimensions 9.7 cm wide, 20 cm high and 4.2 cm deep.
• Weight 540 g.

Digital caliper.

• Range -150 to 150 mm.
• Resolution of 0.01 mm.
• Accuracy ±0.03 mm.
• Operating conditions from 0 to +50 °C.
• Storage conditions from -20 to +65 °C and 10 to 95 % R.H. without condensation.
• Power supply by means of 1 x 3 V battery, type CR-2032.
• Dimensions 4 cm wide, 39.4 cm high and 1 cm thick.
• Weight 360 g.

Optional:

• Tension device (PCE-SJJ015).
  • It has a large opening width for block, glass and cardboard peeling tests.
  • Capacity 500 N.
  • Maximum opening of 33 mm.

• Gripper jaw (PCE-SJJ011) + Gripper jaw adapter (PCE-SJJ06).
  • Useful for clamping different materials such as wire and cable.
  • With a maximum force of 5000 N.
  • Adapter for cable and wire tension testing.
  • Threaded connection type M10.

Options to choose from::