Portable roughness tester with fast value detection and OLED display RT 2000 PCE Instruments

Product description:

• Portable roughness tester, compact design, model PCE-RT 2000.
• It allows the roughness of different surfaces to be measured quickly and easily.
• It is simply placed on the surface to be tested and a key is pressed.
• The information obtained is displayed on the OLED graphic display in the form of a table or graph of the path.
• It has eight measurement parameters.
• It has an automatic switch-off function.
• It has a rechargeable Li-ion rechargeable battery (3000 measurements on one charge).
• Included in delivery:
  • PCE-RT 2000 material tester or PCE-RT 2000BT material tester (with Bluetooth).
  • One stylus.
  • A protection for the stylus.
  • One software.
  • A calibration base.
  • One roughness standard.
  • One USB cable.
  • A power adapter.
  • Carrying case.
  • Instruction manual.

Technical data:

• Measuring parameters are: Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv and Rc.
• The accuracy ranges are:
  • For Ra, Rq and Rc from 0,005 to 16,00 μm.
  • For Rz, Rt, Rp and Rv: 0,02 to 200,0 μm.
  • For Rsm: 5 µm to 1000 µm.
  • For Rsk: -1 to 1
• Diamond-tipped stylus, 90 ° angular and 5 µm radius.
• The maximum recommended force for static measurement is 4 mN (0.4 gf).
• The measurement is made by an inductive principle.
• The radius of the stylus guide is 45 mm and its maximum travel is 15 mm.
• Cut-off wavelengths are 0.25 mm, 0.8 mm and 2.5 mm.
• Probing speed:
  • Cut-off wavelength of 0.135 mm/s: 0.25 mm.
  • Cut-off wavelength 0.5 mm/s: 0.8 mm.
  • Boundary wavelength 1 mm/s: 2.5 mm
  • Recoil speed: 1 mm/s.
• Accuracy is <±10 %.
• Repeatability is <±6 %.
• Units used are μm or μinch (selectable).

Optional:

• Interface:
  • With Bluetooth model PCE-RT 2000BT.
  • Without Bluetooth model PCE-RT 2000.

• Test machine PCE-RT2000-Teststand.
  • Used to mount the roughness tester.
  • Allows precise positioning of the probe on the sample object. The testing machine helps the user to move the device vertically and position it accurately.

• Extension rod PCE-TR1200-EB.
  • Enables the length of the probe to be increased by 50 mm.
  • No more than two can be used at the same time.

• Standard spare sensor PCE-RT2000-RP200.
  
  

• Curvature sensor PCE-RT2000-RP110.
  • Probe for curved surfaces.
  • Radius> 3 mm.

• Groove sensor PCE-RT2000-RP131.
  • For measuring the roughness of grooves.
  • Width> 2.5 mm.
  • Depth<10 mm.

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a customised calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::