Portable Roughness Tester with bluetooth connection application RT 1200BT PCE Instruments

Product description:

• Portable roughness tester, compact design, model PCE-RT 1200BT.
• With this Bluetooth roughness tester, the roughness of different surfaces can be measured quickly and easily.
• It is simply placed on the surface to be tested and a key is pressed.
• The information obtained is displayed on the OLED graphic display in the form of a table or a graphical display of the distance travelled.
• It has four measurement parameters.
• By means of the positioning device, measurements can be taken on different types of surfaces.
• It can store 20 values in its memory.
• The product has a Bluetooth interface, so you can establish a Bluetooth connection with an Android device and edit or transfer values, as well as control the roughness meter from your device.
• It has a rechargeable Li-ion accumulator (3000 measurements on one charge).
• Delivery includes:
  • Bluetooth material tester PCE-RT 1200BT.
  • One stylus.
  • A protection for the probe.
  • One positioning device.
  • A calibration base.
  • One roughness standard.
  • One USB cable.
  • A power adapter.
  • Carrying case.
  • Instruction manual.

Technical data:

• Measuring parameters are: Ra, Rz, Rq and Rt.
• The accuracy ranges are:
  • For Ra and Rq from 0,005 to 16,00 μm.
  • For Rz and Rt from 0,002 to 200,0 μm.
• Stylus with diamond tip, 90 ° angular and a radius of 5 µm.
• The maximum recommended force for static measurement is 4 mN (0.4 gf).
• The measurement is made by an inductive principle.
• The radius of the stylus guide is 45 mm and its maximum travel is 15 mm.
• Cut-off wavelengths are 0.25 mm, 0.8 mm and 2.5 mm.
• Probing speed:
  • Cut-off wavelength of 0.135 mm/s: 0.25 mm.
  • Cut-off wavelength 0.5 mm/s: 0.8 mm.
  • Boundary wavelength 1 mm/s: 2.5 mm
  • Recoil speed: 1 mm/s.
• Accuracy is <±10 %.
• Repeatability is <±6 %.
• Units used are μm or μinch (selectable).

Optional:

• PCE-RT2000-Teststand testing machine.
  • Used to mount the roughness tester.
  • Allows precise positioning of the probe on the sample object. The testing machine helps the user to move the device vertically and position it accurately.

• Extension rod PCE-TR1200-EB.
  • Enables the length of the probe to be increased by 50 mm.
  • No more than two can be used at the same time.

• Standard spare sensor PCE-RT2000-RP200.
  
  

• Curvature sensor PCE-RT2000-RP110.
  • Probe for curved surfaces.
  • Radius> 3 mm.

• Groove sensor PCE-RT2000-RP131.
  • For measuring the roughness of grooves.
  • Width> 2.5 mm.
  • Depth

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a customised calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::