PCE Instruments 2550 PCE Instruments compact, hand-held, integrated striker hardness tester with OLED display

Product description:

• Durometer model PCE-2550, high precision, compact design and very versatile.
• It is used for the control of incoming and outgoing material.
• It has an automatic disconnection system.
• The data can be downloaded via USB and it has a memory for storing up to 36,000 values and 350 groups of data.
• This hardness tester can be set in different units, with a wide range from very soft to very hard surfaces.
• It has a maximum and minimum value alarm.
• It has an OLED display that allows to read the values even in dark areas.
• The dimensions are 32 cm wide, 145.5 cm high and 26 mm thick.
• The weight is 160 g.
• Delivery includes:
  • One material tester PCE-2550.
  • One USB connection cable.
  • One test block.
  • One cleaning brush.
  • One Ø 14 mm support ring.
  • Carrying case.
  • Instruction manual.

Technical data:

• The measuring range is 170 to 960 HLD.
• Measuring direction is 360°.
• The striker is type D.
• The units are HL, HB, HRB, HRC, HRA, HV and HS.
• Ten different materials can be selected.
• Calibration is carried out by means of a test block.
• The minimum workpiece weight is 2 kg (on stable base, 50 g with coupling gel).
• The minimum workpiece thickness is 3 mm, with coupling gel.
• Power is supplied by two CR2016 batteries.
• Ambient conditions for use are 0 to +50 °C.

• For steel and cast steel.
  • Units used are Rockwell, Brinell, Vickers and Shore.
  • Measuring ranges.
    • HRC: 17.9 to 68.5.
    • HRB: 59.6 to 99.6.
    • HRA: 59.1 to 85.8.
    • HB: 127 to 651.
    • HV: 83 to 976.
    • HS: 32.2 to 99.5.

• For tool steel.
  • Units used Rockwell and Vickers.
  • Measuring ranges.
    • HRC: 20.4 to 67.1.
    • HV: 80 to 898.

• For stainless steel.
  • Units used Rockwell, Brinell and Vickers.
  • Measuring ranges.
    • HRB: 46.5 to 101.7.
    • HB: 85 to 655.
    • HV: 85 to 802.

• For grey cast iron.
  • Rockwell, Brinell and Vickers units.
  • Measuring ranges.
    • HRC: does not have.
    • HB: 93 to 334.
    • HV: does not have.

• For spheroidal cast iron.
  • Rockwell, Brinell and Vickers units.
  • Measuring ranges.
    • HRC: none.
    • HB: 131 to 387.
    • HV: does not have.

• For cast aluminium alloy.
  • Rockwell and Brinell units.
  • Measuring ranges.
    • HRB: 23.8 to 84.6.
    • HB: 19 to 164.

• For brass.
  • Rockwell and Brinell units.
  • Measuring ranges.
    • HRB: 13.5 to 95.3.
    • HB: 40 to 173.

• For bronze.
  • Brinell unit.
  • HB measuring range: 60 to 290.

• For copper alloy.
  • Brinell unit.
  • HB measuring range: 45 to 315.

• For alloy steel.
  • Brinell unit.
  • HB measuring range: 143 to 650.

Optional

• Adapter set for Impact D (PCE-HAK) striker force measuring devices.
• Includes:
  • Concave adapter HZ12.5-17, 12.5 to 17 mm (inside).
  • Concave adapter HZ11-13, 11 to 13 mm (inside).
  • Concave adapter HZ16.5-30, 16.5 to 30 mm (inside).
  • Convex adapter Z10-15, 10 to 15 mm (outer).
  • Convex adapter Z14.5-30, 14.5 to 30 mm (outside).
  • Convex adapter Z25-50, 25 to 50 mm (outer).
  • Internal ball adapter HK11-13, 11 to 13 mm (internal).
  • Internal ball adapter HK12.5-17, 12.5 to 17 mm (internal).
  • Internal ball adapter HK16.5-30, 16.5 to 30 mm (internal).
  • External ball adapter K14.5-30, 14.5 to 30 mm (external).
  • External ball adapter K10-15, 10 to 15 mm (external).
  • Universal bracket.

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • When ordering, please contact the customer service team and indicate the calibration information required.
  • Calibration service is non-returnable.

Options to choose from::