Digital thickness gauge with wide measuring range for any homogeneous material PCE Instruments

Product description:

• The material tester can be equipped with special probes for different measuring ranges.
• It is possible to measure the thickness of almost any homogeneous material with this thickness gauge.
• The ultrasonic speed can be freely adjusted for a correct measurement according to the type of material to be measured.
• The TFT colour display makes it easy to read the measured values.
• The double echo measuring mode allows you to measure through coated parts as well.
• Wide range.
• Various sensors available.
• Battery operated.
• With error and gap detection.
• With internal measurement data memory.
• Can be printed via Bluetooth.
• Delivery includes:
  • 1 PCE-TG 300-P5EE thickness gauge.
  • 1 PCE-TG-P5EE sensor.
  • 1 coupling gel, 100 ml.
  • 4 batteries, 1.5 V, type AA.
  • 1 carrying case.
  • 1 instruction manual.
    
    
    
    

Technical data:

• P-E measuring range: 2 to 600 mm (steel), E-E: 2.5 to 100 mm.
• Minimum tube diameter 20 mm.
• With 5 MHz frequency.
• Diameter 10 mm.
  
  
• PCE-TG 300 - Gauge:
• Measuring range:
  • P-E Pulse-echo mode 0.65 to 600 mm (steel).
  • E-E: Double echo mode 2.50 to 100 mm.
• Accurate to
  • ±0,04 mm H [mm] (<10 mm) ; ±0,4 % H[mm] (>10 mm).
  • H refers to the thickness of the material.
• With a resolution of:
  • 0.1 mm / 0.01 mm / 0.001 mm (adjustable).
• Measurable materials:
  • Metals.
  • Plastics.
  • Ceramics.
  • Epoxy resin.
  • Glass.
  • Any homogeneous material.
• Pulse-echo (fault detection and rechupes) and double echo (hides the coating thickness) measurement modes.
• Calibration:
  • Ultrasonic speed calibration.
  • Zero point calibration.
  • Two-point calibration.
• Normal mode, scanning mode and differential mode display modes.
• Units mm / inch.
• Bluetooth / USB 2.0 print data transmission.
• Non-volatile memory for 100 data sets with 100 records each.
• Operating time:
  • Continuous operation 100 hours.
  • Automatic stand-by mode (adjustable).
  • Automatic switch-off mode (adjustable).
    
    
• Powered by 4 x 1.5 V batteries, type AA.
• With 320 x 240 pixel TFD colour LCD display with brightness adjustment.
• Operating conditions 0 to +50 °C, ≤80 % R.H. without condensation.
• Storage conditions. -20 to +70 °C, ≤80 % R.H. non-condensing.
• The dimensions are 97 mm wide, 185 mm high and 40 mm deep.
• Weight is 375 g.

Optional:

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a customised calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::