PCE-CT 80-FN0D5 thickness gauge with optional ISO calibration certificate PCE Instruments

Product description:

• This is a thickness gauge for the non-destructive measurement of coatings.
• It is suitable for ferrous (steel, iron) and non-ferrous metal bases.
• The external sensor makes it possible to measure in hard-to-reach places.
• It has a V-groove in the heads.
• The head is sturdy and spring loaded for accurate measurements.
• It has an alarm that can be activated when data outside the permitted range is detected.
• It has an LCD display, 128 pixels wide and 128 pixels high.
• Data can be transferred to a computer thanks to its USB interface, compatible with USB 2.0 ports.
• It has an automatic shutdown mode which, after 3 minutes of inactivity, saves battery power.
• Its dimensions are 7.1 cm wide, 14.3 cm high and 3.7 cm deep.
• Delivery includes:
  • Coating thickness gauge with sensor and 1 m cable.
  • 3 AAA batteries.
  • Carrying case.
  • Set of calibration standards.
  • Instruction manual.

Technical data:

• The measuring range varies according to the chosen sensor (see "optional" section).
• The accuracy is ±2 % of the value + 1 µm.
• The resolution is 0.1 µm (less than 100 µm) and 1 µm (greater than 100 µm).
• The minimum convex radius of curvature is 5 mm.
• Minimum concave radius of curvature is 25 m.
• The minimum measuring surface is Ø17 mm.
• The minimum base thickness is 0.2 mm (ferrous base) and 0.05 mm (non-ferrous base).
• It has 3 probe modes.
  • An automatic base detection mode, which allows measurement of ferrous and non-ferrous bases.
  • A magnetic induction mode, specific for ferrous bases.
  • An eddy current mode, which allows the measurement of non-ferrous bases.
• It has 2 measurement modes, one individual and one continuous.
• This device can be calibrated from zero point or by multipoint, from 1 to 4 points for each group.
• The units supported are µm, mm and mils.
• It has 5 memory groups.
  • 1 group with DIR mode, volatile measurement.
  • 4 groups with GEN mode, non-volatile measurement of a maximum of 2000 values with automatic recording.
• It has 5 different statistical functions.
  • Number of values per measurement.
  • Average.
  • Maximum.
  • Minimum.
  • Standard deviation.
• The power supply is provided by 3 x 1.5 V AAA batteries.
• The display has battery status indication and error detection.
• Suitable operating conditions range from 0 to 50 °C and 20 to 90 % R.H. (non-condensing).
• Suitable storage conditions range from -10 to 60 °C and 20 to 90 % R.H. (non-condensing).

Optional:

• You can choose the sensor according to the desired measuring range for ferrous (Fe) and non-ferrous (NFe) bases, measured in µm (micrometres).
  • With a measuring range for ferrous bases from 0 to 500 µm and non-ferrous bases from 0 to 500 µm.
  • With a measuring range of ferrous bases from 0 to 1500 and non-ferrous bases from 0 to 1500 µm.
  • With a measuring range of ferrous bases from 0 to 2000 and non-ferrous bases from 0 to 2000 µm.
  • With a measuring range of ferrous bases from 0 to 2500 and non-ferrous bases from 0 to 2500 µm.
  • With a measuring range of ferric bases from 0 to 5000 and non-ferric bases from 0 to 3000 µm

• Model with ISO calibration certificate.
• • The ISO ICA certificate is a custom calibration with nominal certificate.
  • When ordering, please contact the customer service team and indicate the calibration information required.
  • Calibration service is non-returnable.

Options to choose from::