Roughness tester with LCD display and optional calibration certification RT 10 PCE Instruments

Product description:

• Lightweight surface roughness tester with easy handling.
• Sensor made of diamond.
• Complies with ISO, DIN, ABSI and JIS standards.
• Measuring range Ra and Rz.
• With 4-digit backlit LCD display.
• Via the integrated RS232C interface you can connect the roughness tester to a PC.
• Calibration standard and screwdriver included. In addition to its instruction manual.

Technical data:

• Measuring range:
  • Ra: 0.05 to 10 µm / 1 to 400 µinch.
  • Rz: 0.02 to 100 μm / 0.78 to 40 µinch.
• Accuracy:
  • General: 15 %.
  • Repeatability: Maximum 10 %.
• Resolution:
  • Measuring range less than 10 μm: 0,001 μm.
  • Measuring range less than 100 μm: 0,01 μm.
  • Measuring range greater than 100 μm: 0,1 μm.
• Sensor:
  • Measuring type: induction principle.
  • Sensor radius: 10 µm.
  • Sensor force measurement: 16 mN (1.6gf).
  • Sensor angle: 90º.
  • Vertical radius of probe head: 48 mm.
• Speed:
  • Sampling length: 0.25: Vt = 0.135 mm/s.
  • Sampling length: 0.8: Vt = 0.5 mm/s.
  • Sampling length: 2.5: Vt = 1 mm/s.
  • Return: 1 mm/s.
• Maximum core: 2.5 mm / 0.5 inch.
• Frequency length: 0.25 mm / 0.8 mm / 2.5 mm optical.

Optional:

• Model with ISO calibration certificate.
  • The ISO ICA certificate is a custom calibration with nominal certificate.
  • The calibration service is non-returnable.

Options to choose from::