Professional benchtop lathe for do-it-yourselfers 109x48,8 cm Optimum Optimum

Product description:

• Benchtop parallel lathe from Optimum.
• Measures 109 cm wide, 48.8 cm high and 59.4 cm deep.
• Ideal for do-it-yourselfers. Allows you to create geometric shapes such as cones, spheres and threads.
• With hardened and ground Z-axis guides.
• Spindles with trapezoidal rolled thread.
• Handwheels with adjustable fine scale 0.04 / 0.01 mm.
• 4-sided tool turret.
• The guides can be adjusted by means of a wedge.
• The spindles are mounted on precision bearings.
• With right-left spindle direction rotation. Adjustable on the control panel.
• Possibility of charriot rotation for 5 mm taper turning.
• Handwheel with adjustable fine scale 0.02 mm on tailstock.
• Can be adjusted quickly, easily and without additional tools by means of clamping levers on tailstock brake and tool holder swivel.
• With 230 V motor.
• Guaranteed spindle nose concentricity of less than 0.009 mm.
• IP 54 safety switch with minimum voltage trigger.
• Six speed ranges.
• Concentricity accuracy of the chuck concentricity of less than 0.05 mm.
• Single spindle for threading or turning operations on longitudinal axis.
• The spindle speed is adjustable between 125 and 2000 revolutions per minute.
• Complies with CE and DIN 8606 standards.
• Prismatic bed of grey cast iron, with high precision grinding.
• Spindle mounted with conical bearings in P5 quality.
• Digital display.
• Approved emergency stop switch (push and turn).
• Pressure bearings on main spindle shaft.
• Delivery includes:
  • 3-jaw chuck self-centring 12.5 cm.
  • Fixed centring points MK 2 and MK 3.
  • Chip collection tray.
  • Splash and chip guard.
  • 4-sided tool holder.
  • Interchangeable wheel set.
  • Service tool.