Multi-purpose hygrometer with LCD display and micro USB interface PCE-COG 10 PCE Instruments

Product description:

• This hygrometer allows the measurement of temperature, humidity, monoxide and carbon dioxide.
• By connecting the hygrometer to a computer you can transfer the collected data in *.csv format.
• It integrates a 2" LCD display, which allows easy reading of the data.
• Its dimensions are 5.4 cm wide, 21.5 cm high and 3.4 cm deep.
• Delivery includes:
  • 1 Hygrometer.
  • 1 Micro USB cable.
  • 1 5 Vdc mains adapter.
  • Instructions for use manual.

Technical data:

• Carbon monoxide:
• For the measurement of carbon monoxide its range is 0 to 1000 ppm.
  • This range is valid for ambient conditions from 0 to 40 °C and 15 to 95 % R.H. (non-condensing).
• Its resolution is 1 ppm.
• It operates to an accuracy of ±5 % F.S.

• Carbon dioxide:
• For the measurement of carbon dioxide its range is 0 to 9999 ppm.
  • This range is valid for ambient conditions from 0 to 50 °C and 0 to 85 % R.H. (non-condensing).
• Its resolution is 1 ppm.
• It operates with an accuracy of ± 3 % of the value ± 75 ppm.

• Temperature:
• Its range is 0 to 50 °C and 32 to 122 °F.
• Its resolution is 0,1 °C / °F.
• It has an accuracy of ±2 °C / ±4 °F.

• Relative humidity:
• For measuring relative humidity its range is 0 to 100 % RH.
• Its resolution is 0.1 % RH.
• It works with the following accuracies.
  • ±5 %: 0 to 20 % R.H.
  • ±3,5 %: 20 to 80 % R.H.
  • ±5 %: 80 to 100 % RH.
  • These accuracies are valid after 30 minutes of acclimatisation.
• These humidity variables include a wind speed of 1 m/s.

• It has a 2" LCD display.
• Its measurement rate is 1 Hz.
• It has a memory capable of storing 5000 series of values.
• The recording rate is 1 minute, 15 minutes, 1 hour.
• The working units for temperature are °C and °F.
• The units for Co and Co2 are ppm (part per million).
• It has an audible and visual alarm.
• Data is recorded in a format compatible with Excel (and related platforms), *.csv.
• It has a 1/4" tripod mounting connection.
• For charging the battery and data transfer it has a micro USB interface.
• The battery is powered by 3.7 V and 1500 mAh.
• The mains adapter works with the following voltages.
  • For the input, it works with 100 to 240 Vac at a working frequency of 50/60 Hz and 0.25 A.
  • For the output, it works with 5 Vdc and 1 A.
• The operating conditions supported are 0 to 45 °C and <95 % R.H. (non-condensing).
  • The storage conditions are -10 to 55 °C and <95 % RH (non-condensing).